Search results

My apologies- first pic was a Thor. This is the GEMS. Same thing, same place, All P38 V8s

The Gods in the Parts Department need to look in their parts manual then. All the P38 V8's have them... It's the thing I've highlighted in yellow and it goes where I've put the red arrow.

CIRCUIT OPERATION This operates only with the engine running, which is determined by the HEVAC panel. In the off state, the signal is at 12 volts. When the Heated Front Windscreen is activated, the signal is switched to 0 volts. This provides the ground required for relay 5 to be pulled in, as...

Just one- RH rocker cover

Inside the tube in top of rh rocker cover that the hose pushes over. I linked to it above

Did you remove/ clean the separator as well? If it's been sitting there with nothing blowing/ sucking through it, it's likely to be bunged up as well

Depends what it's blocked with. Should only be a bit of oily sludge in there, unless someone's blocked it off deliberately.

Hose- https://www.brit-car.co.uk/product.php/96101/0/breather_hose_engine_v8_rr_p38 Separator- https://www.brit-car.co.uk/product.php/505916/0/oil_separator_v8_discovery_1___2___range_rover_classic___defender (Remove and clean) Stub into plenum should be unobstructed

Flanged bolts

Seems to be a lot of excitement about "air bag replacements", but you all seem to be discussing air springs! LR state that, as part of the maintenance schedule: Air bags The front air bags on SRS vehicles must be renewed every 10 years. The side air bags must be renewed every 15 years. So the...

So, you say you've recently had cam pulley fitted. Was that fault there before you changed it? By cam pulley you do mean the cam sprocket that timing chain runs over to drive cam?

How many instances of the fault have been recorded? Have you cleared it and checked how quickly/ if it comes back? Long term trims not stuck at extremes?

From the screenshots both lambda sensors appear to be functioning correctly, in as much as they're "flipping" and neither is pegged at one end of scale or the other What exactly is the problem you're trying to solve? This thread started out as testing coil packs, moved into lambda sensor...

Screenshot them and post to an image hosting site then insert url as a picture. That's what I did above anyway.

Rare for a cam sensor on a GEMS to actually fail. Common for the connector to the cam sensor to fill up with gunk thus "failing" the cam sensor. Check it's clean and that all wires are intact before splashing out megabucks. CSV Viewer is available from the Support & Downloads section of the...

Can't remember Pete. Looking at the durations probably just engine running. Use the official Nano CSV viewer on your PC with the Nano plugged into it to see the charting as above. Of course you'll need the SD card in your Nano to record the data in the first place.

Flat numbers like that aren't very informative. Use your Nano to record some live data, then you'll be able to see whether your lambda sensors are flipping as they should. Screenshot only for illustration. Your results will differ!

Have you tested the Viscous Coupling?

It's winter. Most people just let it grow until summer.

It is fitted to all, but the connector numbers are different on the GEMS. Same circuit though