- Posts
- 2,427
- Location
- Isle Sheppy
Yer got that now will try run live data check in the morning and post the o2 sensors data mines a motortronic not gems cheers for all the help again
P38A Coil packs
- Thread starter pete12345
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 19,297
- Location
- Buckinghamshire, UK. ('95 DT)
If you have Microsoft Excel then open the file with that, select column A and then press ALT, D, D, E, select semi-colon and then hit return.
- Posts
- 2,427
- Location
- Isle Sheppy
can anybody tell me how to transfer grapghs from csv viewer to the forum do I just have to take photo of the graphs then upload them or is there a way to just transfer them over cheers
Orangebean
Active Member
- Posts
- 137
- Location
- South Hams, Devon
Screenshot them and post to an image hosting site then insert url as a picture. That's what I did above anyway.
- Posts
- 2,427
- Location
- Isle Sheppy
- Posts
- 2,427
- Location
- Isle Sheppy
I've anybody can tell something about my 02 sensors from the graphs it be much appreciated or the cam sensor thanks again in advance
Orangebean
Active Member
- Posts
- 137
- Location
- South Hams, Devon
From the screenshots both lambda sensors appear to be functioning correctly, in as much as they're "flipping" and neither is pegged at one end of scale or the other
What exactly is the problem you're trying to solve? This thread started out as testing coil packs, moved into lambda sensor replacement, but no reference to what exactly the problem is.
What exactly is the problem you're trying to solve? This thread started out as testing coil packs, moved into lambda sensor replacement, but no reference to what exactly the problem is.
- Posts
- 2,427
- Location
- Isle Sheppy
Oh sorry I did a thread on o2 sensors a bit back all it was is the old girl had problems last year on mot with emissions and I think somebody said check o2 sensors I've just had new cam pulley fitted and another pulley and belt just trying to make sure for next mot in march and there is a fault showing up on nanocom
Orangebean
Active Member
- Posts
- 137
- Location
- South Hams, Devon
How many instances of the fault have been recorded? Have you cleared it and checked how quickly/ if it comes back? Long term trims not stuck at extremes?
- Posts
- 2,427
- Location
- Isle Sheppy
Yer clear the fault but it just says currently there post 19 I put a pic up
Orangebean
Active Member
- Posts
- 137
- Location
- South Hams, Devon
So, you say you've recently had cam pulley fitted. Was that fault there before you changed it?
By cam pulley you do mean the cam sprocket that timing chain runs over to drive cam?
- Posts
- 2,427
- Location
- Isle Sheppy
No the pulley that the belt runs on yer the fault was there before it went in garage
Gems cam sensors can be extremely troublesome. If they short internally or on the wires you are buggered. It blows the ECU as soon as the keys turned. It leads to massive overfueling thus black smoke very bad running etc.
Just unplug it and the engine should still run ok. It's difficult to access thougg
Just unplug it and the engine should still run ok. It's difficult to access thougg
- Posts
- 2,427
- Location
- Isle Sheppy
Well no black smoke just that fault that keeps appearing
