Search results

Also would someone be able to explain what happens inside the instrument panel as I see the black lines between the warning indicators and they go to a a but not sure what that actually means. Thanks

Put a td5 in my old 90, used a defender ecu with defender looms ect. Yesterday I finished the pipework and filled it up with coolant.. Went to turn it on and nothing. It was immobilised... Long story short I'd managed to join all 3 black wires for the bbus alarm to earth without realising. Now...

Would anyone on here be so kind as to measure the thread pitch on their TD5. Im fitting a td5 into my 90 and im struggling to find the master thread size. ive ordered all standard 90 clutch pipework and I know the slave side is m12 but the difference between the early 90 and td5 90 master is the...

A quick Google shows the master cylinder is m12 for the td5 slave but does anyone know the thread size for the master cylinder end and the pipe diameter I need to use? I'm putting a td5 onto my 90 and the old pipework was the same as brake line but I'm sure that the td5 disco pipe is thicker. Thanks

picked up the green immob box and a key fob from a friend who broke a disco 300tdi as they have the same part number, this now lets it crank if i use the fob or doesnt let it crank if it is immobilised. Just need to get some fuel for the tank and i can try it and see if that makes it sit at idle.

happy days. Would it start at all with the throttle settings on 3 and not 2 or would it just not run?

Ive put a new chassis on my 1989 90 and ive done away with the 200tdi and gone for a disco td5 lump and box. Over the last year ive been buys the bits i need to get this thing to work (External fuel pump ect ect) Last friday i managed to get it to start but only by bypassing the black and...

if original ecu from his truck got sent off then storm usually just sends out another ecu. I took mine to him for my td5 disco and he took an already done ecu out and swapped it for mine, that needed the security codes learning with a nano com to get it to work but for a 90 id assume plug and...

Jumping in on an old thread from a Google search does anyone know where one would find an adapter for the standard oil sensor so that I could add an oil pressure gauge? Going from 200 to a td5 and there seems to be less bits n bobs available for them

So the chassis is fully stripped and sat needing some love. What's the best primer, rust treatment and paint to use? I was thinking of using raptor to paint the chassis with.

Nice!

self taught, me and my flock of pigeons don't do too bad a job I suppose. Just picked up my 3rd welder today since starting with a poxy Clarke 85en gasless thing. The joys of land rovers!

something like that mate, these kind of posts make me cringe. I 5k isn't going to get him anything that isn't going to require the poor guy to be lay under it several times a year practicing his new found vocabulary..... I paid 2800 for mine on a G reg 4 maybe 5 years ago with hardly any...

Don't do it. Keep the freelander

yes mate you had to do the same on the td5, its the first auto box ive ever removed but was pretty simple. The manual box is now in im just missing the pipe from the slave to the master but the connections and pipe are bigger than youd use on brake lines, trying to find the connector size as I...

Hi all. I'm changing the gearbox from. Auto to manual on my td5 and I've misplaced the pipe from the donor that goes from the slave to the bulkhead near the master cylinder. It's an early td5 so it has a factory join on the bulkhead I have a spare piece of steel pipe from the donor truck so I...

Cheers @jamesmartin again

I'm swapping the auto to a manual on the td5. Tonight I removed the transfer box so tomorrow its onto the gearbox. My mate reckons the torque converter and box might not just slide off like it does on a manual box and it's the first auto I've ever worked on to be fair.. Is there anything I...

I have a nanocom in De55 if you struggle. I also have the ace i removed from mine with some rubber pipes to the rear if you can't find anyone to make some up. Pretty cool idea to use rubber pipes instead of the metal ones that rot like the rest of the truck