Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. PPP38vouge

    Inlet Manifold Gasket notches..?

    Oh, forgot to add when replacing end seals purchase good quality, I went for original Land Rover, have heard others do not fit so well.
  2. PPP38vouge

    Inlet Manifold Gasket notches..?

    Hi, Did my valley gasket just last week, Google cannibalv8.com, they do a good write up on the valley gasket installation with pictures. Tackled the front crank oil seal to, I remember you saying yours was leaking too, really an easy job, hardest part was removing old seal. Please be carefull...
  3. PPP38vouge

    L322 Drivers Door Lock Mechanism replacement.....

    Yet another excellent HOW TOO Ant, I think Haynes have got some competition slowly emerging.
  4. PPP38vouge

    What did you do with your Range Rover today

    Totally agree, especially when in flappy paddle gearbox mode.:D:D:D
  5. PPP38vouge

    Belt pulley.

    I purchased a 2005 model 2.0 turbo, cheap as chips and have to say it has been a good motor. Gave it a full service when I first got it changed all fluids including auto box which is just undo sump nut drain and refill, no filters involved. It is superb on fuel and is fairly nippy too. Of...
  6. PPP38vouge

    Belt pulley.

    Hi Keith, The bearings on my pulley look like they are sealed, could be wrong though, I haven't the know how to change them or the tools, wish I did, could probably save a fortune over the years.
  7. PPP38vouge

    Belt pulley.

    Ummm, yes. The Rangie is not my everyday driver now so I thought parts like that opting for aftermarket products will be ok. Will only do a couple of thousand miles a year now in the Rangie as I have purchased a Saab 9-5 for work and running about, will only use the Rangie at weekends and for...
  8. PPP38vouge

    Belt pulley.

    Ordered, not bad price,only £10 delivered from rimmer brothers.
  9. PPP38vouge

    Belt pulley.

    Excellent, thank you wammers.
  10. PPP38vouge

    Belt pulley.

    Good evening all. Thor V8 MY2000. Would any of you gentlemen have the part number for the belt pulley that sits under the tensioner , been doing some work on it, replacing a few gaskets and waterpump and noticed the pulley bearings grumbling when I spin it. Thanks in advance , Paul.
  11. PPP38vouge

    Navigation DVD or CD

    You can purchase them on EBay, got mine from there.
  12. PPP38vouge

    EAS Compressor - 3.5mm hex?

    Thanks Alan, your correct, Hold on a minute I have just made the 200 club.:clap2::clap2::clap2:
  13. PPP38vouge

    EAS Compressor - 3.5mm hex?

    Whoops, bit slow, note to self, must pay more attention.:o
  14. PPP38vouge

    EAS Compressor - 3.5mm hex?

    No, no need to worry about that. The pump only supply's the air , nothing will leak back through once disconnected.
  15. PPP38vouge

    P38 Nanocom

    Nanocom, can't take her off road when it breaks.
  16. PPP38vouge

    DM... anyone seen this, nice cheep car... a few dents!!

    One good thing, at least they all started after all that time. Must have the updated RF receiver fitted.
  17. PPP38vouge

    fuse box strip down and repair

    Hi Dave, When I purchased my RR I also had the check book symbol popping up occasionally so got a friend of mine to pop over with his nanocom and when he plugged it in it showed that the sensor on the coolant pipe behind the dash was reading incorrectly, may be your problem too. They are a...
  18. PPP38vouge

    Valley gasket

    Thanks for advice chaps, and the ribbing, wouldn't expect anything else. So I take it it's not imperative to use HOLYMAR then, going to order a land rover one from rimmers not a britpart one?
  19. PPP38vouge

    Range Rover syndrome

    Yes, all of the above plus will always park furthest away when shopping at tesco and will check every panel when I return to check that no scrotbag has bashed it, drives the missus mad, but I love her, the rangie that is.
  20. PPP38vouge

    Valley gasket

    Good evening chaps, Bit of advice needed please. Is it possible to change valley gasket without removing rocker covers? I was removing some parts for renewal at the the weekend, renewing waterpump, power steering hose, steering damper, and the front crank oil seal, when everything was stripped...
Back
Top