Search results

If you can wait a couple of days for delivery I find island 4x4 are usually very competitive on price

Hi There, I would strongly reccomend downloading the software and buyins the lead. It will enable you to read the faults adjust the settings and test out he sytem fully. Once you have the EAS faults cleared raise the suspension to fulll wading height open a door switch off the engine, with...

Hi There, yep it is and all you can do is drfill the heads off and punch out he bases. You cab then either re rivet them or use guttering bolts, due to the flat slotted heads, cut really short to refix. Personally I re rivetted mine. Good Luck

Thanks for the responses - obviously I have trawled ebay, but I don't want the overpriced unravelling Cr*p that is mostly listed. The alternative proper flexible jointing sections listed appear to be too short for what I need. Just thought that some one who had engineered, rather than bodged...

Hello Gents, can anyone recommend a low cost good quality flexible exhaust seller please - I need about 2 foot of 57mm ID for a project exhaust

Hello Gents, standard tyre size for my 16" rim is 255 65 16. has anyone fitted a cheaper to get, not too chunky, but not road pattern alternative as the standards only fit P38's discos and fronteras, I thought a 265 70 16 might be good - anyone tried them? cheers

Hello Gents, Quick update, thanks to your advice I have checked out the thermal sensor and it is Knackered - open circuit when cold - not good. Thanks for your help - Now I can get on and fix the thing

Hi Gents, thanks for the replies, haven't checked the thermal cut out yet , pressure switch is open circuit when tank and springs are decompressed using latop, still won't run unless switched by the laptop. Will check the thermal switch and let you know. at the weekend. Cheers again

Hello Gents, can anyone give me a clue on whats up with this. She has a very slight leak on the front bag - takes 2 days to drop from standard to access height, but here's the problem. The system will not tell the pump to run. when connected to the unlock software there are no faults listed I...

Hello gents, Does anyone know how often the timing belt needs changing on a 12j. I have now got the Landrover 90 workshop manual downloaded but under routine maintenance all it says is to clean the timing cover housing filter. Couldn't find a mileage to change the belt at any where Cheers:)

Can any one suggest a good timing pin kit supplier?

Hi Gents, Can anyone confirm if the 12j has a cam belt or chain please?

when you loose drive on the front wheels do you mean they are spinning with no grip or dop you mean they are not rotating at all? If the fronts are spinning the VC is locked as it should be with little grip available, if they are not rotating at all then the VC is Knackered.

Basically your problem starts with a leak from the air bag or pipe. The morning thing is due to the timed self levelling of the system. If you don't fix the leak your compressor will be knackered through running for far too long. Check for leaks by unplugging the relay under the drivers seat and...

Hi Gants, Can some one tell me the rolling diameter of a 265 70 16 tyre please Cheers

My pcmia card measures 90mm by 55mm my Visa card is 85 x 55 so call me wrong for 5mm in an aproximate measure when explaining to some one what size slot to look for....ffs

No - your laptop will have a slot usually on one side that a card the size of a credit card but twice as thick would go into. just plug it in and run the cd that comes with it. when its not in use you keep it in a drawer

I had the 4 indicators on symptom a while ago, it often resulted in a resync being required. unplugged the arial from the rf in an attempt to reduce the risk, didn't make any difference, bought the syncmate used it twice which paid for it easily. Later found the problem to be one of the micro...

The eaiest and most permanent fix for the emulator drivers is to buy yourself a pcmia serial port card they are available from maplins for about £50 or like I did from the internet for less than a tenner. As the card uses pcmia drivers they are sure to work with any laptop you like.

Sounds to me like its just leveling itself out. If you are in it solo, when you get out, the drivers side will lift a little as the air pressure is too high for the now reduced weight. as soon as you shut the door the suspension will level itself out - as long as it isn't falling to the stops...