Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. mikerajjers

    My rebuild....broad rebuild help please

    **** me, 100 pounds for one, 75 for the other. I think I will have to reweld the arm back on
  2. mikerajjers

    My rebuild....broad rebuild help please

    does anybody know the part numbers for the sliding levers on either side of the instrument cluster? The left hand side is for demister/cabin + temperature, the right hand side is for fan speed. My car is LHD so may be different to RHD. I can´t find the part number in RAVE
  3. mikerajjers

    My rebuild....broad rebuild help please

    There is some kind of join here...I guess not factory. Has it bypassed the horn? The wire from the horn stalk is purple, and then attached to a black and purple wire from the loom. Not sure why this is...any ideas?
  4. mikerajjers

    My rebuild....broad rebuild help please

    Here is a pic of my lower dash...the bulkhead is ok and was repaired.
  5. mikerajjers

    My rebuild....broad rebuild help please

    The lower dash seems to be just a duct from the heater to the cabin/windscreen and for wiring to speakers. Mine is totally rotten and falling apart. Is it possible to get a replacement? I wonder if there is an aftermarket alternative... as the whole ducting mechanism for the heater/windscreen...
  6. mikerajjers

    My rebuild....broad rebuild help please

    I have come across this wire which was plugged into the instrument cluster where the 24icon appears. The other end wasn't plugged in anywhere. What is it? Can I bin it?
  7. mikerajjers

    My rebuild....broad rebuild help please

    My rebuild is in full swing and rather than post each question on a separate thread I thought I'd start a new thread. I have put the main parts of the body together with some alignment but I will tweak later when the doors are fitted. At the moment they would just be in the way. I have a 1998...
  8. mikerajjers

    Some advise please

    The oil leak from the hub and grease on ABS sensor should have been picked up when the differential was being replaced. The half shafts need to be taken out. It is possible that this could have happened during refitting.
  9. mikerajjers

    REAR DOOR SKIN REPLACEMENT

    Have a look on this site. Skins are quite cheap. https://www.sp-4x4.com/DEFENDER_REAR_DOORS_s/107.htm
  10. mikerajjers

    Defender 110 Roof Leak - magic?

    It could potentially be condensation but can be a sealant crack. If you don't want to reseal the gutter then try this https://www.ebay.co.uk/itm/Captain-Tolleys-Creeping-Crack-Cure-Sealant-60ml-CARAVAN-MOTORHOME-BOAT/322512805440?epid=1048738179&hash=item4b1742de40:g:nBgAAOSwRoZZh4Xk. I have it...
  11. mikerajjers

    Winter tyres / wheel off set

    Bfg at are good all round tyres. There are better tyres for snow and ich but at a trade-off. They will be worse on mu, vravel, etc. There is now a never tread on the Bfgs. I think they are now called Bfg at km2. I have them and they are very good.
  12. mikerajjers

    Defender 110 Roof Leak - magic?

    Does it leak when the car is stationary or driven? There are lots of areas where water can ingress. Are you able to trace where it is coming from?
  13. mikerajjers

    Re-sealing my roof gutter

    To be honest it looks better in the pictures than in real life. The paint isn´t perfect and there are lots of knocks and little dents. It was originally a police Defender in Croatia. I´m doing the best I can with the skills I have. I paid a local guy to do much of the work for me but it was a...
  14. mikerajjers

    Photo of 300tdi rad bracket attachment please

    Thank you! Perfect! And very helpful! Good point about the horn, mine seems to be missing together! No idea where I put it after dismantling the whole vehicle
  15. mikerajjers

    Photo of 300tdi rad bracket attachment please

    Hi, could someone please take a photo of how the two top radiator brackets attach please? On a 300tdi please. There seems to be a rubber spacer and not sure exactly how it attaches. Mine were missing when i bought the car
  16. mikerajjers

    Re-sealing my roof gutter

    Hi all, I´ve finally got round to re-sealing my roof gutter. Hopefully the roof will be back on within the next week or so. I had the roof re-sprayed three times. Lond story but in short 1st time shocking finish and the bloke didn´t bother to remove the gutter sealant (after saying he would)...
  17. mikerajjers

    P38A V5 information

    Thank you mate! It is very nice of you and I really appreciate it!
  18. mikerajjers

    P38A V5 information

    I will possibly need a CoC but perhaps not. They didnt ask for it in the past when i imported a Disco 2. If i do need it can it be issued by a dealer?
  19. mikerajjers

    P38A V5 information

    I want to export the vehicle abroad and they are quite keen to see correct details on the paperwork. For example the wrong cubic capacity for the engine is on the V5. Apparently it is possible to change/correct this. Engine number is listed as 'not known' power is listed as '23kW', no emisions...
  20. mikerajjers

    P38A V5 information

    Hi, I am due to collect a1995 P38 4.0 auto Lhd. There are some details missing in the V5 as it has been imported in the past. The seller has agreed to organise for these details to be added. Please could somebody send me a copy of their V5 for a 4.0 auto? Obviously I don't need or want your...
Back
Top