Search results

If you do get one get one with a red top engine in it:rolleyes:

Just give it a good tug :-) Relays just pulls out as well, a wee wiggle side to side does help but not too much. Only the spade connectors hold them in

Have you seen the price of just the 2 cruise buttons? If your getting the steering wheel switch included as well as the dash switch it seems reasonable as at least the steering switch will have the little metal bracket and screws which will cost at least a tenner you if you buy the switches 2nd...

I'll just leave this here (just in case), to save you posting a new thread regarding your SRS dash warning light:rolleyes: https://rimmerbros.com/Item--i-YRC100350?scid=scplpYRC100350&sc_intid=YRC100350&gclid=EAIaIQobChMIgLTuyomP2wIVC53tCh2IHQGfEAYYASABEgLjl_D_BwE

Sure is there is a work around https://www.landyzone.co.uk/land-rover/search-function-error.329809/

What makes you tick?

No, that's the Scots, they have lugs instead of ears As in Are your lugs painted on? to those who don't listen

Black with a white middle, by the look of it :-)

Not sure about the petrol ones, but on the diesel ones, there is a circuit board in the key which needs programmed to the car for the immobiliser. I presume the petrol one is the same for the alarm system

Here's one of the many https://www.island-4x4.co.uk/body-chassis-door-latches-locks-c-3792_2658_2660_3759.html

If it is your hub, make sure you get TAY100060 G if it doesn't have a G at the end of the part number. you'll be replacing it again sooner rather than later.

Doesn't usually cost that much to have the garage replace them

No https://www.landyzone.co.uk/land-rover/search-function-error.329809/#post-4263504

Is it part of a pipe? No.15, perhaps

First and foremost, I would say get your battery checked. Kwik Fit do it for nothing and will test it with their kit. A close second would be to have the codes read using a recognised code reader. No point guddling about in the dark, codes will assist And of course Welcome

does black smoke not signify possible intercooler or air pipes delaminating near the turbo?

Might be worth a try https://www.lrisolutions.co.uk/products/discovery.html

Hi Joe :-) In my copy of RAVE, there doesn't seem to be any wiring diagrams for the Defender but this may be of some use

+1 for http://www.preserveprotect.co.uk/

Only one way to learn, if you're considering having a garage do those easy jobs, you are going to be poorer than a church mouse when other more serious stuff needs doing. Get stuck in, plenty of good write ups to help you along the way. Should manage it all in a few hours