Search results

That’s the one thanks ,any Idea how to connect them up to the. P38 ?.

I am not sure how to check the injectors I had a look earlier it didn’t look damaged ,I seem to recall there is a type of test light but I can’t remember what they are called .

Thanks guys (should I say and girls )I am retaking my domestic gas next week (for the last time ) so I won’t get a chance to work on the car until the weekend then I’ll fit the new coilpacks leads and plugs and hopefully that should rule out the ignition side of things while the plugs are out I...

Thanks Kermit ,I will recheck the compression when I pull the plugs out to change then next week if the new bits don’t work then I’ll remove the rocker covers and have a look .I have a brand new cam and all the necessary parts to change it in the garage so I can do that at the same time but it...

Well I fitted the spare coil pack this morning and changed plugs 3 and 5 for plugs 1 and 7 no difference it’s still not firing on cylinders 3 and 5 .I am not sure if this related but Jackie came out as I started the car to try it and she said that stinks it’s like sulphur it did really stink...

My first thought was the coil pack 3 and 5 that’s quite a coincidence I found a spare one in the garage I’ll change it tomorrow, my nanocom is recording misfires on cylinders 3 and 5 .When I pull the plug caps there seems to be a good spark but it’s hard to tell .I will change the coil pack in...

No they don’t look any different to the other six ?

Hi Folks I need your help again my p38 started missing a couple of days ago,I removed the spark plug leads one at a time and on cylinders 3 and 5 it made very little difference I have replaced the spark plug leads and plugs with some spare ones I had in the garage which has made no difference I...

You are correct Henry,I just ordered some thank you .

Would anyone know the part number for the o rings on the engine oil cooler pipes on a p38 1999 4.6 Thor engine please .

Hi Folks would anyone know the correct part number for the EAS delay timer relay in a 1999 4.6 V8 the one in my car is a ANR 4357 marked 1994 the later ones marked 1997/8 are ANR 4652 are they interchangeable?.

Thanks for taking the time to reply folks much appreciated,I thought I might end up locked out of the car or even worse Jackie ends up locked out of the car as she has decided to use it everyday to take the dogs out ,she now prefers it to her Golf .

Hi Folks there is a buzzing sound coming from the divers side rear door on my 1999 4.6 P38 whenever I lock or unlock the car it only lasts a few seconds and the door lock does operate ,is it likely to be the solenoid. I intend to strip the door card off and check the mechanics internally, I am...

I used the car today I got the Alarm fault message once ,anyone got a clue what that could be about ?.

Thanks for the reply Saint ,yes I did try that .Its working now tell me if this makes any sense to you ,I had tried all the settings I could one at a time and nothing UNTILL I switched on Police mode and it started straight away ,switched it back to normal and its fine started it at least half a...

Hi Folks I need your help a couple of days ago I got a message on the dash,alarm fault so when we got home I got the nano com out and switched the alarm off no more message anyway today I had a couple of hours to spare so out came the Nanocom and I switched the alarm back on to try and see what...

Its was a 40amp fuse which is marked up for the EAS in the engine compartment ,I replaced it and it started but blew straight away I disconnected the compresser and it started half a dozen times no problem changed the compresser for my spare tried another half dozen times all OK compresser is...

Hi folks 'all sorted now starting and running well.

Hi folks I need some help Jackie said don't mess about ask on Landyzone they will put you right .We used the car yesterday and did about 200 miles all OK this morning jumped in turned the key dash light's up turn the key to the start position nothing I got Jackie to turn the key and I can hear...

Thanks for the suggestions I will take the socket out and have a closer look and perhaps change it for a new one .