Search results

It had sound proofing when I bought it , heavy rubber mats front and back and thick foam or similar under the bonnet

I'm awaiting all the bits , I'll need to order some brown and white wire for switched live / live . Does the radio need to be fused or is it ok as I'm piggy backing from fuse box ? Also what gauge wire do I need? , Thanks .

That's a good option , I'll have a think about that , thanks

Thanks for all the advice , your installation looks great , I've seen this on Amazon , delivered for £25 , originally I thought that the sound quality/volume would be useless , however it's got amazing reviews , apparently the volume is great and you can add additional speakers , for £25 I'll...

Great , thanks , id forgotten about the permanent live , I think the light circuit is the only permanent live ? , I may be wrong , the pictures below show where im intending to put stereo , the original aerial was extendable but wasn't in the wing it was on the drivers side of the bulkhead and...

I have for the last 10 years tried my best to keep the landy original , however now that you can get Bluetooth radios from eBay for a tenner (shipped!, I've already got one it's actually good! ) I'm going to put a pretty low key one into the dash. I have a few questions. I've fitted fog lights...

Just seems a bit thin considering its potentially going to take impact but it does look as if it's 3 mm , I'll go with that , thanks

There is a hole in the rear cross member , it's pretty big , I've squared it off and it's about the size of a mobile phone , I'm going to weld a patch in , however the good metal , ( and I have gone right back ) is not very thick , about 3mm , should I just order some 3mm steel patches from...

It seems that my fusebox is pointless because if I remove all of the fuses everything still works ! , I've been told that this means that there is a live feed on the wrong side of the fuses , how would I go about finding out where this positive is coming from , I'm assuming that it's a spade...

I have a small update (it's cold outside! ) the yellow plunger does go down and stay , the red stick goes forward ,central and back and is still attached to the rod which it is clearly pushing in and out , I am going to take off the front cover to see if the other 2 rods are moving , just 1...

Yeah , I've sort of come to the same conclusion , strange thing is that it drove 5 mins before , I'll try and degunk it in the morning , the yellow lever does seem to be going down and holding though but I'm hoping that that's all it is. I've got the tunnel out at the moment so that probably...

Yeah , I've pushed it down , it does stay down and pops back up when I pull the red lever back , would that still happen if what your suggesting has happened ? Thanksx

Ok , I have removed the rear prop and it's no longer making the noise , however there is a new problem !Ok , I've had a short-lived success here , I took the rear prop off and the noise has gone so I'm really grateful ,( slight noise but probably front shaft , same noise but very low level noise...

This is the thing , I can go into reverse and all gears quite easily , its just the noise , I had come to the conclusion that it was the layshaft bearing , however a lot of people state that if this is the case reverse gear will not be possible , is this the case because if it is I can tick...

Am I right in thinking that if a layshaft bearing has gone on my series 3 2.5 petrol that I would not be able to go into reverse ? . I have no way to get the gearbox out and no money to pay for it to be done . I also have a exhaust , indicator stalk and footwell to repair so I'm thinking about...

Hi , I've got some floor panels I want to weld , I've never welded before and know some of these are questionable , id rather buy a 2nd hand one for about £50 from one of you guys than a crap cheap new one for £75 that wouldn't weld foil , I specifically do not want a gas one , I live in the...

Ok I've been lazy appears main beam is blue/red and blue from supply . Answered my own question!

I might take it off and have a look before binning it , all other functions apart from main beam are working it's strange as the light isn't actually operated by the stalk , however I know for a fact that it is the problem as ive had the same in the past , can anyone advise what wire colour...

I've got a 1000 things wrong with my series 3 so I'm starting with the easiest and cheapest , I've already had 2 Britpart indicator stalks in 5 years , obvious issues with melting points , have been advised to get a lucas one , bit pricier but I expect they are worth it , however I've never...

You have to be careful nowadays poundland also sell things for two pounds and five pounds , it's a minefield.