Search results

Well.. yes I did have to take it off and move it down abit for it to work perfect!

replacing a front door glass in my d2. The metal rail on the new glass seems to be further forward than it will allow to go on my mech. Can I remove this off the glass and fit further down or am I missing somthing? Thanks

Look carefully and I think you will find its et25 and et-35 (minus) My standards were et57. Use this..... https://www.willtheyfit.com

2003 Td5 D2 by the way

My sunroof leak must be back, I'm presuming it's that as it's raining and now my key fob wont unlock it! I have also just discovered the barrel or somthing is missing from my drivers door!! I've never put the key in the lock, I've never needed to! Now I have and there is nothing in there I dont...

Tread needs to be coverd. To get that size on I imagine you will have to have -25 offset mods so you will I think need a 50mm aftermarket arch

What size tyres you using? Td5?

They just bolt in.. if you can get the old bolts out that is!

Mudflap retention bracket

Perfect this is good to hear and pretty much exactly what I was thinking although the washer simpler! There is arround 3-4mm of thread after the nut and I wanted it as strong as possible hense the idea with the 4mm plate. The axle thankfully looks fine its just the bracket. If I can find a...

I cant find anyone that's willing to pull this out for me! Some arent interested and one guy wants the body taking off. It's a substantial bracket to smash forward with big hammer and bending things twice will only weaken it! What I'm thinking of doing is as the chassis looks good is cut the...

There is no increase in pressure but there is an increase in flow/volume over the surface area provided by two fans. What you are suggesting is if one fan is ontop of another! Anyway let's agree to disagree I'm not one for going back and forth. All the best :)

Yea sure, will be tomorrow though as I've just got in bed, out at 5am tomorrow!

It's a d2 tyre wear if fine and drives great just now I have a wheel rubbing on half lock. I'll see if I can get it pulled as the bolt through the radius arm is at an angle so will need to be changed and re brushed in the future anyway looking at it

I'm not doubting your knowledge as there are some very clever people about and I'm sure you are one of them but I would like to understand this. Are you saying there is no improvement in cooling using two fans instead of one as there is no increase in airflow?

A bucket of water... put one 5lpm pump in it A second bucket of water the same size...put 2 5lpm pumps in it Wich one empties first? Swap the water for air and the pumps for fans

Me... nothing... my mrs??? I'm thinking it must have been before alignment as it was abit wandery then and its driven perfect since the alignment. Im wondering if they only aligned from the front wheels and not 4 as I wasnt there when it was done and the receipt just says "alignment" although...

If they are side by side then they do have a joint airflow of 4500 :)

Just been out and had another look and the mount where the radius arm meets the chassis has been shunted back! Will the be able to be jigged straight?!