Search results

The ABS sensor connection is in a small box mounted on the wheel arch liner....if you jetwashed the wheel arch liner you may have got the connector wet....it is the blue one! When the ABS system detects a fault it will put a message out on the CAN and the EAS will go out in sympathy, along with...

Looking at his last post - this was 27th Feb so he may not have been online since then....Phil is a busy boy me thinks!

Gearbox can be done with the right tools to compress the clutch packs correctly, patience and a decent vernier etc etc... Torque Converter is a specialist item, they need to be cut open, rebuilt then welded back together.

If it is tthe Jag V8 - I think the spline issue was resolved by then...

Realy is in the Pax compartment fuse box.... and it does run tthrough the coupler..

Am I ever not going to be reminded of this dark moment??? ;) Yes, the oil pressure problem was solved by using the correct O Ring on the pick up pipe....and it wsa one thing I replaced (but not with an OEM O Ring) so considered that not to be the issue.....low and behold @Grrrrrr and his...

Thanks @Nodge68 and @andyfreelandy .... Just been reading about your diff failure and subsequent rebuild - you will have noticed my post on Freel2 aswell....as I posted there also. Sounds like we have suffered similar failure and through your research found other similar failures too, chiefly...

Well, the wife had an interesting time in my FL2 the other day.... Driving to her parents with the kids (100 miles - 98% of it on the motorway/fast A roads) and she reports there was a violent jolt - like someone had momentarily jammed the brakes on and then a release followed by grinding and a...

Dude....so sorry to hear of your woes, that sucks bro. Thoughts are with you @ukadamwest

Well done fella.

I replaced my rear wiper motor for a pattern part - £37, it is a single nut on the wiper arm, undo the two torx screw hidden in the little 'handles' on the inside of the boot door cover, pop it off the clips, release the wiring connector to the motor, 3 bolts hold the motor in place, pop it out...

Further to....this is my M57 powered 730d, same engine as the 330d, 530d and the TD6 Range Rover....my Check Engine Light comes on with ignition and off once started - curious, but I think this is the TU engine so as mentioned bu @stustrong it may have changed for the update....vid below:

I amm going to go check my 730d with the M57...I am intrigued now!!!

The L322 CEL does indeed come on during ignition....as per my vid about 8 years ago....

Dats my pic too....hee hee... There is an O Ring on the cap held in by the circlip - O Ring size unknown, sorry...but they go brittle and/or flatten out causing a leak. And before you ask, this was not the O ring that caused my curios lack of oil pressure - that was on the oil pick up tube...

Can't be too cautious on unsolicited communications....

It is from an 'artist' call O.T. Genasis - recently featured on the new Apple iPhone 13 Ad....and i quite liked it, so I used that - I am also quite keen on the Dua lipa/Elton John Pnau Remix of Cold Heart too....so that may feature on my next music inspired 'How To'

Would have opted for an L322 - got isofix, buckets of room and is still a Range Rover.... (says he who has recently got himself an FL2 - shhhhh)

Now, before y'all give me a damn good kicking - this is in the spirit of being helpful, I know most Ejoke owners won't ruin their nail polish to attempt a repair, but thought it may not hurt to post this refresh video I made of our Freelander 2 starter solenoid rebuild. The FL2 and the earlier...