Search results

98 R diesel needs new viscous fan and ABS accumulator and usual drivers seat wear other than that its great> Only asking for £2000 where am i going wrong?

Open switch remove rusty broken spring make new spring from coat hanger fill switch housing with grease rebuild switch and bobs your uncle. Costs nothing. Did it on mine and works a treat.

RANGE ROVER P38 TAILGATE APERTURE SEAL (GENUINE) on eBay (end time 29-Jan-11 14:53:02 GMT)

I have no problems with anything, battery or altenator.

This is not a question but more of an observation i just wanted to share with people. I have no problems with my heaters so never get the symbol appearing, but if i plug my booster pack into my cig lighter for charging on the move before i turn the ignition on the symbol appears. If i unplug the...

Security and Alarm System Operation & Diagnosis on Range Rover 4.0/4.6/P38A

The RAVE icon looks like the land rover badge but says RAVE (file type application). When you open this adobe acrobat reader will open with a pdf with a picture of the beach during sunset with the text "RAVE the after sales viewing enviroment for the service technician". This is where i got lost...

Try this i used it last week. www.myrangerover.co.uk

What size fan? I am assuming it would fit on the back of the rad in place of the original.

That post wasnt there when i read it LOL. ;)

Could just be condensation in the exhaust. Check if your using water.

Outstation controls eveything on the door. Inside the door lock there are 2 micro switches, one for door open or closed and one for door locked or unlocked. i think the door open/closed (coutesy light) switch is the single wire plug (i think its a black wire) but dont quote me on this.

Just because the connections look alright dont be fooled! I took my door latch out and stripped it down (Not as bad as it sounds) because it would not work with central locking but it turned out to be the female plug where someone previously had rammed a test probe in and opened up the connector...

Alternator charge signal to BeCM , plug C114 (C1289 99my onwards) pin 15 should be 12v with engine running. Also check small terminal on the alternator i think that is the charge signal???? I am assuming the battery warning lamp on the instrument panel goes out when the engine is...

I am going to try this very soon, When the ignition is turned on the relay will energise sending the temp signal through term 87 and the resistor making the ECU think the enginge is cold, as soon as the engine is running and the alternter is charging the wire connected to term 85 will change...

This is what i bought, but if you go direct to the manufaturer its cheaper. Leather dye for RANGE ROVER L322 HSE P38 DISCOVERY SE on eBay (end time 24-Dec-10 14:58:30 GMT) Car Leather Cleaner (liquid leather) If you buy from liquid leather you get 250ml (£17-65ml ebay) for only £2 more...

Will be doing mine tommorow with the wifes nail art airbrush will try and get some pics.

Ultrasonic transducer receiver,0.2-4m RS Stock No. 237-0783 Ultrasonic transducer transmitter,0.2-4m RS Stock No. 237-0799 They can also be found on ebay cheaper 40KHZ ULTRASONIC TRANSDUCERS, ALARMS / ROBOTICS fba12a on eBay (end time 22-Dec-10 12:35:05 GMT) Exactly the same thing made by...

I read on the rangerovers.net site about a guy replacing the ultrasonic sensors on the in cab sensor module and thought i would give it a try. I ordered a transmit and a receive sensor from rs components and soldered them in place and bingo no alarm fault message anymore and the alarm goes off...

I would really recommend making the metal rod shorter then the wires do not pass between them. I think if you asked people who had repaired ther seats the majority would tell you this is where there wires had broke aswell. Cushion!