I would just like to say

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
DanClarke said:
@Hippo the word ratted has no swearing or connotation other than to an adult. Why the angry face?
I specifically did not use the other term because I felt it would fall foul of this rule.
If it keeps on like this I may take my custom elsewhere ;)
Click to expand...
Yous been caught by the "thou shalt not post another's post with swearin in it" commandment.
I has been caught that way too many times!!
 
kevstar said:
Yup the problems caused by peeps not cleaning it properly after going offroad. We have a mighty pressure washer in the
yard but it would take the paint off if yer not careful.
Click to expand...
I woz chatting to a Frog bloke this evening at the producers' market, over wine and cheese as we do.
He was out in Algeria during some of the "trubles" over there. He said that they used to put grease on the front of their vehicles when they knew a sandstorm was approaching.
The grease caught the sand and stopped it sandblasting the paint off the vehicles.
 
Stanleysteamer said:
I woz chatting to a Frog bloke this evening at the producers' market, over wine and cheese as we do.
He was out in Algeria during some of the "trubles" over there. He said that they used to put grease on the front of their vehicles when they knew a sandstorm was approaching.
The grease caught the sand and stopped it sandblasting the paint off the vehicles.
Click to expand...

Yer but do they get the grease off with all the sand stuck to it..
 
kevstar said:
The misses has decided she wants window shutters inside anyone got these, probably cheaper & quickerto buy em rather than me
making them.
Click to expand...
Us too.
But, the fixing of internal shutters was too onerous and would end up with 2 big bulky lumps on either side of the bay window.
Instead I had CNC cut plywood inserts made to fit inside the window panels. They are papered plain on the outside and with the wall covering tarty chinoiserie paper on the inside faces. They are held in place with rubber "U" tabs glued to the panels.
It is a chore to put them up/take them down but it looks great and keeps the maximum daylight in the room when they are down and we have no need for curtains or curtain tracks etc.
 
derwendolly said:
I am trying to get a few days away but the frequent but irregular meetings of my Cardiac Rehabilitation programme service is making it difficult to do.
Click to expand...
Sad but good.
I am sure we all are hoping that your rehab is going as well as it should if not better.
Hopefully once done and you are where you need to be then time aay will be a just reward!:)
 
DanClarke said:
Us too.
But, the fixing of internal shutters was too onerous and would end up with 2 big bulky lumps on either side of the bay window.
Instead I had CNC cut plywood inserts made to fit inside the window panels. They are papered plain on the outside and with the wall covering tarty chinoiserie paper on the inside faces. They are held in place with rubber "U" tabs glued to the panels.
It is a chore to put them up/take them down but it looks great and keeps the maximum daylight in the room when they are down and we have no need for curtains or curtain tracks etc.
Click to expand...
I remember you posting about this before. Wiv pics if I remember creckly.
I may also have said at the time that our Georgian house in Bath had interior shutters. They folded into cavities in the walls either side of the windy. Only practicle if done from new I think.
By the time we got to the house they had taken them all out, but in the front downstairs room they cut some of the shutters up and used them to make a hinged lid for a toy cupboard under the window, which was quite neat I thort!
 
So, having been to the weekly producers' market then watched bit o a DVD, W has gone to bed and I have to fit the pump, water, unfit the pump then put the hens to bed all by torchlight!

Oh and our slightly bonkers neeb has now bought yet another tratter, a French army one, a 110 with a TD4 engine. At least he can drive it around!

Sleep well all!!:):):)
 
DanClarke said:
Us too.
But, the fixing of internal shutters was too onerous and would end up with 2 big bulky lumps on either side of the bay window.
Instead I had CNC cut plywood inserts made to fit inside the window panels. They are papered plain on the outside and with the wall covering tarty chinoiserie paper on the inside faces. They are held in place with rubber "U" tabs glued to the panels.
It is a chore to put them up/take them down but it looks great and keeps the maximum daylight in the room when they are down and we have no need for curtains or curtain tracks etc.
Click to expand...

Our cottage is over 400 years old so the walls are over 2ft thick, the living room wall to windows go in at an angle so ideal
for frame fixings for hinges as it wont obscure the window. Need to look at designs and fittings.
 
Stanleysteamer said:
That bloke wiv the dodgy diff has now decided he is going to have a go at it!
Pleased for him. It is all too easy once you get to a certain age to simply let things slide.
Me being a bad offender!
Click to expand...

Who's got a doggy diff then..
Stanleysteamer said:
So, having been to the weekly producers' market then watched bit o a DVD, W has gone to bed and I have to fit the pump, water, unfit the pump then put the hens to bed all by torchlight!

Oh and our slightly bonkers neeb has now bought yet another tratter, a French army one, a 110 with a TD4 engine. At least he can drive it around!

Sleep well all!!:):):)
Click to expand...

Puma with a bulge on the bonnet?? Guess what..... 🤣 🤣
 
You must log in or register to reply here.

Similar threads

V8Eddie
RR Vogue SE A 1990 3.9 Petrol. Do I sell or do I do her up?
2
Replies
22
Views
3K
Mark Piercy
Mark Piercy
2008Freelander
New member New Zealand 2008 Freelander next to my 1982 G-Wagon LWB
Replies
6
Views
469
2008Freelander
2008Freelander
H
Defender battery - what I fitted
Replies
8
Views
2K
johnlad
johnlad
G
48V Alternator run off the PTO to supply a big battery bank and inverter?
Replies
5
Views
2K
SteveMarquis
SteveMarquis
wills
P38A Range Rover [SOLD] - 1998 (R reg) - P38a - 2.5DSE - Range Rover for sale...
Replies
2
Views
871
wills
wills
Back
Top