Stanleysteamer's latest activity

Here's how Rimmers do it.

I bet there are threads on here about it, if not elsewhere on the net. But one thing I have heard is that it is better to take the transfer box off first as it is heavy and awkward. Do you have a second pair of hands to help? That is more or...

Good point. I think I also noticed that it is FFR so should be 24 volt, not 12 V. Maybe that has summat to do wiv it? Nope just says "plus Bowman" and the aux socket on the dash says 12V , which is weird as in that case what else could it be...

Why is there no serpentine belt around the alternator?

Mornin Dry with sunny intervals and a breeze Bees a plenty on me sunflowers, big buggers an all Takin the 'Moonshine Truck' out for a drive today Oooh , here's one o those sunny intervals 😎 Stay busy all :)

Looks good the last garage heater I had was a salamander it burnt waste oil and diesel it roared like a jet plane 😵

Morning All. :D Sunny & not raining, but pretty cool ATM. :) Poor night's sleep. :( Have a great day. :D

Trap was triggered last nite. Fink it were done when it were pushed over a bit. Guessing it were a fox. There's a brick on top ov the plastic box to keep it in place. Eye topped up the peanut butta. Also put some in me second trap. Then moved it...

Looks like flood damaged.

OK, that's me done, off to kip. Sleep tight all! :):):)

Top speed of 80 kph??? Pffft!

Oh no sir I had a good look at this earlier........ https://www.mod-sales.com/stock/land-rover-3

How much are they asking for one?

I love the way they say that "cylindrical" is a benefit!! and you skimmed past the military etc vehicles to look at these?? LR products an orl? I nearly signed up for a closer look!!

Aye right. 🤣 🤣

Oh, I dunno ------ :rolleyes:

I NEVER drink n drive.

He must have been too drunk to be driving off to get chinee! EDIT, Indians!

He's a bit old to be playing with dolls. :oops:

Rapidly running out of suggestions on here!

Yes there is some play before the clutch engages

I think the wrong master cylinder is causing the problem.not allowing full contact of the clutch. If a slight bit of pressure is still applied it could be causing the juuddet. There must be slack in a LR pedal for correct engagement. Has your...

Release bearing was changed and we checked engine and gearbox mounts they were fine

Do you have an engine crane? If so, in through the passenger side door to take the weight of the gaerbox. But you may actually find it easier to take the engine out.

Id rather drive a freelander than watch kissyball....err wait a min I take that back. 🤣🤣

Can hear somefink struggling to get into a nut. Fink its kev.