1. tonytherunner

    Freelander 1.8 petrol cam sensor fault

    ENGINE COMPARTMENT FUSE BOX F3 15 A CMP sensor fuse
  2. tonytherunner

    Freelander 1 Quietest tires for freebie1?

    +1 general grabber uhp don't go with AT tire or MT .
  3. tonytherunner

    Freelander 1 Disc brake slide pins

    That rubber sleeve on one of the caliper pin is a "anti-rattle".First check if your sleeve isn't deteriorate or oversized. Make sure the inside of the sleeve and the recessed area on the pin is not lubricated (dry) and use lubricant on the exterior of the sleeve/rubber assembly. I was thinking...
  4. tonytherunner

    Freelander engine swap ???

    A good choice is 1.8T from rover 75 ,light engine with turbocharger is made around 200 hp.
  5. tonytherunner

    Freelander 1 Anti-roll Bar Retainers

    Been there done that :)
  6. tonytherunner

    Freelander 1 Anti-roll Bar Retainers

    Been there done that :)
  7. tonytherunner

    What have you done to your Freelander today

    A EJ20 SUBARU ENGINE in freelander,nice.
  8. tonytherunner

    Freelander 1 Turbo mazda swap

    https://www.aulro.com/afvb/freelander-1-a/81257-turbo-mazda-freelander.html
  9. tonytherunner

    Freelander 1 Turbo mazda swap

    What do you think about it ?,the pics do not belong to me. Mazda F2 Turbo motor out of the MX-6 2.2L SOHC
  10. tonytherunner

    Freelander 1 K Series Engine Identification

    distributor cap 120hp DIS ignition 117hp
  11. tonytherunner

    Freelander 1 Freelander 1 1.8 loosing power

    yeah, they are very good HTR ;)
  12. tonytherunner

    What have you done to your Freelander today

    There is a fuse in the Engine compartment fusebox Fuse 3 (15A) CMP sensor ,this is what i look first .
  13. tonytherunner

    Freelander 1 Freelander 1 1.8 loosing power

    This is what i use https://www.ngk.com/product.aspx?zpid=9928
  14. tonytherunner

    Freelander 1 Freelander 1 1.8 loosing power

    The accumulator acts as a damper to damp pulses from the pump and ensure that the fuel pressure in the rail and to the injectors is constant. The accumulator is connected by a pipe to the inlet manifold from which it receives a vacuum to aid the damping process.
  15. tonytherunner

    What have you done to your Freelander today

    New brake pad,clean and grease the guide pin Comline brake pad.
  16. tonytherunner

    Freelander 1 Clutch change - need HELP! - Freelander 1, 1.8 Petrol, 2001

    don't go cheap when is all about the clutch down there is 2 quality option https://www.advancedfactors.co.uk/18k-flywheel--clutch-11585-c.asp