🤣 How did I miss that out? 🤦‍♂️ its a D reg 1986

Hi all Sadly I have decided to sell my 90. I just can't find the time to finish it the way I want it, and its making me sad and frustrated every time I walk past it. :( Its a 1986 Landrover 90. Originally a 2.5 petrol, but now fitted and registered with a 3.6L Motori VM HR692HT, that's had...

know this is a very old post and you've been missing for a while, but wondered if you went ahead with this setup in the end and if so, what it was like. Got a Salisbury on the back of my 90 and considering a detroit locker (NOT a Truetrac), but have heard mixed reviews about using them with a...

I'd check the pads to see if they are all wearing evenly at the same rate side to side and also to make sure no pads are wearing at different rates across a particular pad face. I work for braking supplier and 95% of the "warranty" claims we get for warped discs are nearly always down to DTV...

I think we're agreeing about being able to leave dents. However with the raptor all I had to do was give a quick buff with 120 grit and etch any bare ally. If I'd painted I'd have had to fill, flat, primer (multiple coats), flat, paint (multiple coats), then clear coat. Wich would have cost...

Just painted most of my 90 with black raptor bed liner. I know the raptor splits opinions, but mainly for off road, most panels are dented and it would have taken ages and a fair few quid to get to a stage where painting would have been viable. Plus I had two cases of black raptor I got for...

Gonna need a bit more info than that bud. Is the 110 a v8 200tdi 300tdi td5 age etc. And as said gearstick would be in wrong place on a disco box, but can be rebuilt to fit with correct parts, skill, £££ notes, or all of above

Hi Is this still available? Thanks

FREE!!! if you come and get it, you can have it. Its ****ing me off getting in the way in my garage

Hi all After a brake assembly from an EW series Tmax winch, or complete winch for spares, working or not.

I may be wrong but I'm pretty certain you can just about see he already has a cross drilled input gear, at the beginning of the video.

I will. Just spacer and tape measure are in the garage unit and I'm on the sofa with beer, so LZ first (and lazy) port of call

So I've got hold of some 30mm spacers that turn out to be slightly too small for my defender. Any of you clever people out there give me a clue what they may be off. Bolt pattern is similar, just not as wide as defender and hole where they fit over the hub is also smaller. Something in the...

Hi all, I have 1 x 16x10 modular wheel with bead lock and 305 70 16 tyre off a defender. Tyre is in good condition with no cracking or wear and holds air fine. It was a spare. Wheel and bead lock has some paint/powder coating flaking, but nothing a rub down and spray wouldn't sort. For sale...

And appreciate in value!

I think stephan333 is full of ****. Its a scam just sent me the exact same message to email Mike brown but in Texas. Incidentally, why the hell would you email someone from Virginia to get P38 bits in Swindon o_O

If you've checked the wheels and presumably the bearings, just start working your way up from there. Ie bushings, prop shafts and ujs. Are there any noises as well as the shuddering? I did have a similar intermittent issue and turned out to be a loose handbrake drum and contaminated shoes...

Just noticed on the Timken bearing it says Made in England! Rare thing to see now, on anything!! Shame. They had a factory not far from me in Northampton as I remember.

Well got it drained and the cover off. At least it had ATF in it. Not too much swarf on the plug and although the shaft needs a bit of a clean up doesn't look like any water/rust made its way through to the bearings. What do you reckon?

Will do. Thanks for the tips gents