Hi When would it be convenient to pick it up? Steve

I am after a series wheel as a spare, if anyone has one for sale?

To answer my own question- you wouldn't make it to an MOT station. Only drove 1 mile before it came flying of- fotunately i was only going 5mph (and heading back into my road) :D

Do you mean bearings?

Thanks- that explains it!!!! When I looked on Paddocks I could not work out which one I needed so I phoned them up. The woman told me I needed the smaller ones. As I was making a monumental fook up fitting, them I ended up buying some spares. Just gone out in the garage and measured them and...

Thanks- that explains it!!!! When I looked on Paddocks I could not work out which one I needed so I phoned them up. The woman told me I needed the smaller ones. As I was making a monumental fook up fitting, them I ended up buying some spares. Just gone out in the garage and measured them and...

Thanks- that explains it!!!! When I looked on Paddocks I could not work out which one I needed so I phoned them up. The woman told me I needed the smaller ones. As I was making a monumental fook up fitting them I ended up buying some spares. Just gone out and measured them and the dozy bint...

I had to change the UJ's. I was using a vice to push the cups / shells? in- I used a nut on each end to ensure that I pushed the cup below the surface of the propshaft forks / u section. No matter how hard I cranked the vice I could not get the cup in far enough to get clips on both sides. I...

Hi Jai I am after a series SWB rear propshaft if you have one? Steve

Scrape the contacts clean. mine stopped working as they were covered in crud- scraped it with my nail and it work a treat.

Mine was WELL stuck- in the end I had a socket with a bar? Rather than a rachet and had to use a trolley jack to lift / move the end of the bar. It was on so tight that as I was lifting the jack it was lifting the front end then all of a sudden something gave- didn't know if the socket had...

diesel tanks have 2- one for a feed to the fuel filter / pump. The other is a return- which is not need for petrol.

...

Will you be at the pub on Wednesday/ be able to bring the spanner as I am oping to do the timing chain on Thursday? If not would I be able to pick it up? (without sounding like a stalker I walk myy dog past yours most nights:D)

Luton. I will be at the pub on the 6th. I won't actually be doing the timing chain till the 7th (as my Brother will be down and he knows what he is doing and I don't :p) Steve

Would anyone hapen to have a 42mm socket or spanner I could borrow? I need to do my timing chain and have to get the dog / starter nut of. I was going to buy a socket but they are £25ish then I find they are 3/4" drive, which would mean by the time I buy a bar to go with it, it would work out...

All the snow and talk of laning is making me envious- i recon I am about 4 weeks away from MOT- got a lot of paintwork to do before reassembly, but it is to cold to crack on with it :mad: But I should get to the pub this month.:o

i had a propex on my boat and changed it for a websto warm air. It was good, but a bit greed on the gas.

Had one on a boat with rads and it worked a treat. You do need an expantion tank with it. Don't quote me on this but if you only have one rad you may have problems with it cycling on and of to regularly? Having used the hot air system as well, my preference would be to go for the hot air...

I bet he is a bit fooking cold:D