After killing my Landy on 28th November 2012, it finally is reborn, huge thanks to Jai & Spitfire without their help it wouldn't have been possible.:D

Today it passed its MOT and it has 12 months tax.

All I'm waiting for is the new custom front propshaft and it'll be finished.


Tempted to come out laning on Sunday, recon I can hold my own with anything on a green lane even with only 2WD.
 
This afternoon has been a disaster! Forgot to pick up some fresh locktite so could not bolt the 4 pin diff back together but heyho..... rarther than go out and get some I'll give the diffcase a wire brush up. Done that without much issue. Well might aswell fit a front radius arms as I have them sitting there. Undone one side all 3 nuts an dbolts came undone no problem but one is rusted to the inside metal spacer tube in the middle and because its polys its spinning no matter how much I wedge it up! (I HATE POLYS)!!!

Much swearing and I gave up had a chill and a drink right will have to grind the bolt off inside the mounts job for another day. Then I set about making a press tool for pushing in new diff bearings turned on my bench grinder and the switch disintergrates and flies out the shed door in 2 pieces. I have a half built P38 converted 4 pin center, a clean diff case and all the bits bar one bearing to assemble it!!

So I have given up and will resume normal work tomorrow time for a Beer! or 10!!
 
Still trying to find lanes over warwickshire.whos got memory map. Could get a route off someone maybe. Are national trails drivable. The ones with diamonds on maps.
 
jai_landrover said:
This afternoon has been a disaster! Forgot to pick up some fresh locktite so could not bolt the 4 pin diff back together but heyho..... rarther than go out and get some I'll give the diffcase a wire brush up. Done that without much issue. Well might aswell fit a front radius arms as I have them sitting there. Undone one side all 3 nuts an dbolts came undone no problem but one is rusted to the inside metal spacer tube in the middle and because its polys its spinning no matter how much I wedge it up! (I HATE POLYS)!!!

Much swearing and I gave up had a chill and a drink right will have to grind the bolt off inside the mounts job for another day. Then I set about making a press tool for pushing in new diff bearings turned on my bench grinder and the switch disintergrates and flies out the shed door in 2 pieces. I have a half built P38 converted 4 pin center, a clean diff case and all the bits bar one bearing to assemble it!!

So I have given up and will resume normal work tomorrow time for a Beer! or 10!!
Click to expand...

Glad it's not just me with problems like this then.
 
Spyderman said:
After killing my Landy on 28th November 2012, it finally is reborn, huge thanks to Jai & Spitfire without their help it wouldn't have been possible.:D

Today it passed its MOT and it has 12 months tax.

All I'm waiting for is the new custom front propshaft and it'll be finished.


Tempted to come out laning on Sunday, recon I can hold my own with anything on a green lane even with only 2WD.
Click to expand...

:clap2: Hey, hey. Nice one.
 
Hi Guys,

Was planning on changing my brakes but got stuck as I didn't realise you need a tool/socket for the nut.

Anyone have one I can borrow?
 
Does anyone know of any greenlaning routes around warickshire. I know theres some there but im struggling to get any information on them. Even phoned the local council but wernt helpfull at all.
 
You must log in or register to reply here.

Similar threads

A
Hampshire Green Lane Trip 11th August.
2
Replies
26
Views
2K
Anaconda
A
G
Top 100 green lanes
2 3
Replies
46
Views
3K
Freddie17
Freddie17
A
Peak District lanes
Replies
8
Views
2K
Anaconda
A
ar1g3
P38A Looking for p38 parts in Kent area
Replies
13
Views
691
Datatek
Datatek
A
Non Scratchy Greenlane Trip Berkshire/Wiltshire
Replies
10
Views
2K
Anaconda
A