Thanks, Started drilling out the spot welds in the floor, what a pain in the ass. Gave up as it started raining, and I don't have a garage / workshop. Joel

Great, I'm going to fertan it all first, then paint. Shopping list is growing by the day...... Joel

Question for Mr Noisey, what did you paint your chassis with? While I have the floor up and the fuel tank out I was going to wire brush it and paint it up. Joel

I think the mounts for radius arms and shocks are different, it's doable, but its a lot of work. Joel

LAND ROVER SERIES 2 CHASSIS V5 LOG BOOK TAX EXEMPT 88" SWB | eBay Another one... Smells fishy to me

What are the rear inner quarter panels like? I need some for repair work if they are any good. J

Sworn at it several times, removed bumper and towbar with assistance from an angle grinder and a dremel, completed with a massive hammer.. J

Managed to get the towbar and bumper off. Ended up grinding / cutting off two of the bolts as the fixed nuts snapped off, one of the bolts sheared on the other side. Then a fookin great lump hammer to get the towbar off. Looks like the towbar took a whack as the rear crossmember is bent in the...

****, I thought mine was bad. Mind you, all my inner quarter panels are rusted to crap as well. J

+1 I think it would be easier to find project threads, particularly when researching how to do something a previous member has done, sometimes your not always sure on the starter, or what to search for J

Me three, Footman James refused to insure me if the vehicle was being used for offroad or green laning. Sure term came in with the best quote of any of the insurers by £300 J

I'm using halfrauds advanced calcium as a main battery at the moment, has more than enough power for starting, and I know a few people have two for winching. 4 year warranty, and they are only £100 each, compared to the top yellow top at nearly £300 Granted, the yellow top is 975 CCA and these...

To offer a balanced newbie opinion, I joined last year, but only really started posting fairly recently. By using the search, and not asking dumb questions (most of the time), I've found most members to be helpful and friendly. J

Wait for some guy with a metal plate in his head to be stuck to the side of the landy. J

I'd fit one that says "EJECTOR SEAT".. the pikeys near me are not that bright, and that would put them off for hours.. J

Just over 1200, probably more than I should have but it fitted what I wanted, but I don't mind really chassis is good and the engine is sound. Its a project for me to do that isn't my job (I work lots of stupid hours and travel a lot and never really get much downtime). Opportunity for me to...

I've decided to have a crack at the welding myself, so just looking for a welder to buy to get me started. This weekends Jobs: - Remove fuel tank & sender - Remove front seats & carpets - Cut out boot floor area - Remove seat belt anchor's from boot floor with as much brute force as I can...

What about something like this: Filing Cupboard My mate used an old tumble dryer / washing machine chassis for something similar. J

Covered it over with a big tarp - to avoid any more water entry... J

Probably helps :P