Andy Land said:
Swivel pins and bearings took me a day on my Fender which included fitting new wheel bearings ... not a bad job but quite greasy ;)
Click to expand...

Sounds encouraging. The bit about using the right shims to get the tension right worries me a little, but I might give it a go. :eek:)
 
Dr No said:
Sounds encouraging. The bit about using the right shims to get the tension right worries me a little, but I might give it a go. :eek:)
Click to expand...

With new swivel pins and railko bushes you are best to put all the shims on to start with and then check the pre-load using a cheap set of fishing scales. Pre-load should be around 8 - 10lbs. If it is too loose simply remove a few shims until you get the load right. It's all explained on here if you get stuck ;)
 
Fitted a kill switch after some dodgy bloke in a transit pick up turned up asking if I want to sell it. Now when its turned off the engine just turns over without firing, sounds like it has no fuel.

Gonna invest in some other bit when Ive got some cash too.
 
removed front carpet to see why its like a swimming pool, have a nice 4inch split on each side, so water has been flooding in. will hold of with welding till it next rains and i can double check
 
a2dds said:
Fitted a kill switch after some dodgy bloke in a transit pick up turned up asking if I want to sell it. Now when its turned off the engine just turns over without firing, sounds like it has no fuel.

Gonna invest in some other bit when Ive got some cash too.
Click to expand...

Im planning on doing exaclty the same! dont wan sum fukker trying to drive it off!
 
discomark10 said:
Im planning on doing exaclty the same! dont wan sum fukker trying to drive it off!
Click to expand...

There is a central locking kit with alarm for 2 doors on flea bay for £30 and a gps tracking thing for just under 60 on amazon. They are next on the list for me. Then I might look at a fuel starving valve. fooking pikeys thinking they can nick me stoof!
 
Oil and filter change - now the oil pressure gauge reads 35psi on idle :)
Fitted new windscreen wipers
Fitted a bracket for the tow bar electric plug
Fitted my waterproof winch cover
Adjusted the washer jets

Daz
 
You must log in or register to reply here.

Similar threads

B
defender 2.4 puma reverse light switch
Replies
4
Views
549
BEASTIE 90
B
Padda.116
300tdi disco 1, new head gasket oil leak!!
Replies
10
Views
650
Padda.116
Padda.116
Knappster
Shot-blasting steel wheels
Replies
9
Views
931
Knappster
Knappster
Mooky
Replacing thermostat
Replies
14
Views
604
Mooky
Mooky
I
Re-coding of ABS Module after repacement
Replies
10
Views
1K
invisible999
I