So today I striped a S1 speedo.milage works but speed takes time to register.
Never seen a set up like it. A set of magnets/weights spin and this moves a disk.repaired the zero spring. Not tested yet.
. D09EE563-96CD-457F-9CAD-F34314DB5A73.jpeg

Now to the wiper. Strip down as it does not turn off. mrs has pulling out the feed cable so Sorted the switch.
17455934-A35C-4C19-9D7B-4DCB5FB74B8A.jpeg


Then spot the spindle loose. Replace that.
Then spot the wiper blade U/S replace that tomorrow.

No need to look at the passenger side it don’t have 1. Apply plenty of rainex Wednesday.

What more jobs will she give me before Wednesday.
 
Series 3 1983. I have been lining up my replacement YRM nearside footwell. It fits perfectly.
Only problem is that the bottom flange that it gets welded to is near rotted away or paper thin and will need chomping out,
 
Wiper blade did not have the correct end so off to the shops to swap. Then find out that most now have single fit ends. Search cheap blades & has fitting kit. Sorted

Check spares box. All there.
Fitted spare wheel.
Replaced & repacked the oils in their relevant locations.

Now waiting on the weather to see if we go truck cab or full canvas
 
Yep.
Will post plenty of photos of the trip/classic cars and the both series 1 80”.
(& while away confirming plans for the hero Lejog in December in the other S1.)
 
Hicap phill said:
They won the spirit of the event award 2009.
Decided to do it again for fun.i just provide the delivery to lands end & collection from finish.

https://heroevents.eu/event-schedule/le-jog-2019/
Click to expand...

Wow that’s a treck even in a modern car, is that your missis and niece in the list?
Not doing it in the Herald?

I see lots of potential entrants but not too many confirmed, but still a good turn out.
I see a couple of Cooper S on the list:).

Remind us all closer too the time, I am sad(happy) to say We don’t own a car that qualifies.

So you still have to drive it too:D twice.

J
 
SIL & mrs. It’s better in the LR as snow over the borders gives them the advantage.
Last time the petrol was freezing in the carb.
Move the air intake over the exhaust & a piece of cardboard resolves this.
 
Just got it back from Ashcrofts. Transfer box upgrade to 1.22 output as I do a lot of motorway driving (and oil seal/probably worn output shaft bush was blown). It's a real difference - I'm going to have to re-calibrate my hearing now 3rd gear high revving at 30pmh has gone. 70 May now be an option!

Ashcrofts also pointed out I'd had an older transfer box fitted in the past and not the type it should have for a '98 110. The reasons not to go back to the first garage I used just keep piling up as I slowly replace their work.....
 
gymmaniac said:
Just got it back from Ashcrofts. Transfer box upgrade to 1.22 output as I do a lot of motorway driving (and oil seal/probably worn output shaft bush was blown). It's a real difference - I'm going to have to re-calibrate my hearing now 3rd gear high revving at 30pmh has gone. 70 May now be an option!

Ashcrofts also pointed out I'd had an older transfer box fitted in the past and not the type it should have for a '98 110. The reasons not to go back to the first garage I used just keep piling up as I slowly replace their work.....
Click to expand...

What did thee charge you for the work if you don't mind me asking?
 
was at a breaker and bought complete westfalia tow bar with storage box 2 keys ,plastic plug and manual and complete electrics with control box. Had to take off myself. Cost £180 Hook was on rusted. 20 minutes with hammer and rust oil ok. bargain. To sandblasting tomorrow
 
You must log in or register to reply here.

Similar threads

B
defender 2.4 puma reverse light switch
Replies
4
Views
549
BEASTIE 90
B
Padda.116
300tdi disco 1, new head gasket oil leak!!
Replies
10
Views
647
Padda.116
Padda.116
Knappster
Shot-blasting steel wheels
Replies
9
Views
927
Knappster
Knappster
Mooky
Replacing thermostat
Replies
14
Views
592
Mooky
Mooky
I
Re-coding of ABS Module after repacement
Replies
10
Views
1K
invisible999
I