Freediscoranger

Active Member

• Oct 22, 2011

• #11,081

replaced the UJ's on the front prop, fitted some 265/75 r16 BFG AT's now getting an odd clunking noise when rolling along at about 4 mph still getting the noise as if the UJ's have gone despite all being okay. still getting a loud noise when turning left despite new front wheel bearings

 

S

Simplyoliy

Member

• Oct 23, 2011

• #11,082

Off to spend some time lying underneath. Stripping back the chassis for fresh paint/waxoyl. Using some rusteater to try and clean things up. Then wheels off to check hubs and brakes, as i think they'll need done some time soon.
And since its semi dry better now than in the ****ing rain!

 

chezvegas

Active Member

• Oct 23, 2011

• #11,083

Replaced the brake fluid, hopefully the brakes will be a bit better than just sticking my feet through the floor!

 

crookedspireite

New Member

• Oct 23, 2011

• #11,084

fixed my diff lock light and polybushed my rear end

 

The Mad Hat Man

Well-Known Member

LZIR Despatch Agent

• Oct 23, 2011

• #11,085

replaced the rear body mount bolts.
fitted rear bump stops (new bolts)
fitted 1" spacers to rear suspension.
schultzed over the welding of last weekend.
primered and first top coat on rear wheel arch repair.
started to look at front inner wings. :bolt:

 

Fur Trapper

Banned

• Oct 23, 2011

• #11,086

The Mad Hat Man said:

replaced the rear body mount bolts.
fitted rear bump stops (new bolts)
fitted 1" spacers to rear suspension.
schultzed over the welding of last weekend.
primered and first top coat on rear wheel arch repair.
started to look at front inner wings. :bolt:

Click to expand...

You know the :nopics:

 

The Mad Hat Man

Well-Known Member

LZIR Despatch Agent

• Oct 23, 2011

• #11,087

gimme a chance - i only came in 10 mins ago and am having tea.

 

Headtester

Active Member

• Oct 23, 2011

• #11,088

The Mad Hat Man said:

changed the rear bump stops.


or, more precisely, fitted some on there, as there was only the backing plate attached

Click to expand...

Where did you get them from Mad? - I need to fit some to my Disco II

 

Fur Trapper

Banned

• Oct 23, 2011

• #11,089

The Mad Hat Man said:

gimme a chance - i only came in 10 mins ago and am having tea.

Click to expand...

I've seen you give peeps less than 2 minutes more grief so put the tea down

 

S

Simplyoliy

Member

• Oct 23, 2011

• #11,090

Managed to get the engine to **** oil everywhere! Removed the breather pipe from the air intake (19J engine) Stuck it with a bottle to catch any oil, didn't realise i needed a hole in the bottle to let the pressure back out .
So after ****ing a chunk of oil out. I cut a hole in the bottle and problem fixed!

Also took off the front wheels and cleaned up everything inside the arches and painted them. Chassis is half painted, but all preped. to be finished during the week.

 

The Mad Hat Man

Well-Known Member

LZIR Despatch Agent

• Oct 23, 2011

• #11,091

OK pics for ya.

 

Attachments

• 
  IMG_1415.JPG

  233.7 KB · Views: 234
• 
  IMG_1416.JPG

  123.5 KB · Views: 144
• 
  IMG_1420.JPG

  277.4 KB · Views: 219
• 
  IMG_1424.JPG

  285.6 KB · Views: 226
• 
  IMG_1419.JPG

  372.3 KB · Views: 233

ratty

I'm not special I'm limited edition

• Oct 23, 2011

• #11,092

Yesterday I drove mine back from the Isle of widget and then let the ballast drive it home from work after I picked up the truck and the chav box..

Today I let it have a rest and walked past it twice.

 

gemsdad

NOT BOTHERED.

• Oct 23, 2011

• #11,093

Series71 said:

Took the series for an MOT and it passed with 1 advisory on the exhaust !!!!!

Click to expand...

exhaust advisory,perhaps they would like you to get one.:mooning::behindsofa:

 

ratty

I'm not special I'm limited edition

• Oct 23, 2011

• #11,094

gemsdad said:

exhaust advisory,perhaps they would like you to get one.:mooning::behindsofa:

Click to expand...

I think it was a typo and should've read 'exhaustive advisory list'.

 

gemsdad

NOT BOTHERED.

• Oct 23, 2011

• #11,095

ratty said:

I think it was a typo and should've read 'exhaustive advisory list'.

Click to expand...

that sounds more like it.

 

gemsdad

NOT BOTHERED.

• Oct 23, 2011

• #11,096

The Mad Hat Man said:

ere Gems - can yu PM me yo courier, please?

Click to expand...

pm sent.

 

Karlos28

Well-Known Member

• Oct 23, 2011

• #11,097

waxoyled mine and a mates up to the nines... ready for the salt that they have already started spreading!

 

The Mad Hat Man

Well-Known Member

LZIR Despatch Agent

• Oct 23, 2011

• #11,098

ta

 

Karlos28

Well-Known Member

• Oct 23, 2011

• #11,099

oh, and welded the other side of my bulk head up.. no more frozen hands for me!

 

buckshot

Well-Known Member

• Oct 24, 2011

• #11,100

put the second pair of bfg m/t on the old 90 and fitted 1 of the pair of 2" lift spacers on the back springs

over the weekend made and fitted a couple front mud flaps on the 110