Alibro
Well-Known Member
I was thinking of spraying my wheels black. They could do with a touch up and I think black wheels would look good on my fire engine.
Diesel Do
Well-Known Member
I think they would. Red and black always goes together well. I was going to use the same coating that's on my snorkel and rear guard etc so all of the accessories match.
Diesel Do
Well-Known Member
Skinny Mike
Well-Known Member
Any chance of a video of that running so I can see how loud it is.
My back box is on its last legs, so decisions will have to be made.
I've heard @Nodge68 with the slim line, so would like to compare.
No rush, when you get chance
Cheers and beers
Mike
Alibro
Well-Known Member
Replaced the wiper switch and adjusted the wiper resting position, then crawled under the front to adjust the plastic bits that attach to the under tray and end up flapping around.
While there I noticed a lot of greasy black oily stuff that shouldn't be there. Looks like I'll be replacing one of the CV joint gaiters on Saturday.
How the heck did it pass MOT on Wednesday like that?
While there I noticed a lot of greasy black oily stuff that shouldn't be there.
Looks like I'll be replacing one of the CV joint gaiters on Saturday. How the heck did it pass MOT on Wednesday like that?
Diesel Do
Well-Known Member
Any chance of a video of that running so I can see how loud it is.
My back box is on its last legs, so decisions will have to be made.
I've heard @Nodge68 with the slim line, so would like to compare.
No rush, when you get chance
Cheers and beers
Mike
It's alarmingly quiet. May need a smaller box
@Skinny.M
be similar dimensions to Nodge's slim line job
and be a straight thru type
you'll need to monitor the audio thru some full range speakers .. or headphones
as most of the frequencies are bass ..
https://www.youtube.com/channel/UCX5pOCcsqEdw8NlG4tKd1BA
was recorded with a canon camera mounted on top of the passenger seat
( windows open )
there one bit going over a bridge in Otley
gives acoustic reflections from the stone wall ,,
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
be a couple of vids here of SE88's back-box on mine
be similar dimensions to Nodge's slim line job
and be a straight thru type
you'll need to monitor the audio thru some full range speakers .. or headphones
as most of the frequencies are bass ..
https://www.youtube.com/channel/UCX5pOCcsqEdw8NlG4tKd1BA
was recorded with a canon camera mounted on top of the passenger seat
( windows open )
there one bit going over a bridge in Otley
gives acoustic reflections from the stone wall ,,
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Skinny Mike
Well-Known Member
Replaced the wiper switch and adjusted the wiper resting position, then crawled under the front to adjust the plastic bits that attach to the under tray and end up flapping around.
While there I noticed a lot of greasy black oily stuff that shouldn't be there.
How the heck did it pass MOT on Wednesday like that?
When mine passed the other week, I got home and noticed I had 1 front light!!
But it sailed through the test.
Makes you wonder
All sorted now with a full new set
Mike
Skinny Mike
Well-Known Member
Well, I put the synergy back on, on Sunday, just the tuning part, not plugged the maf bit in.
And nothing,nothing all week until...... tonight, just trundelling along back from Tescos, pushed the accelerator coming
off a roundabout and Vvvvvvrrrrroooom it started working.
So I will run it about for a bit, see if it can return more than the average 37ish mpg i'm getting.
Don't know why it took so long to kick in, answers on a postcard please.
Mike
And nothing,nothing all week until...... tonight, just trundelling along back from Tescos, pushed the accelerator coming
off a roundabout and Vvvvvvrrrrroooom it started working.
So I will run it about for a bit, see if it can return more than the average 37ish mpg i'm getting.
Don't know why it took so long to kick in, answers on a postcard please.
Mike
tonytherunner
Active Member
Testing some interior led light ....when green light is to green
htr
Well-Known Member
Interesting - does that light reflect on the windscreen at night?
Lukas430000
Active Member
I am planning to fit footwell lights. and some other glow to it. Got armrest fitted. Not a genuine one (thats on cards anyway) but ebay own haha. Nice addition. And matches my new black interior. Yesterday was cleaning and adjustment day. Figured out why there is small amount of water in the boot. While I was adjusting tailgate glass to properly fit over seal noticed that plastic membrane is missing. With just a leftovers of glue. I have some sikaflex sealant and plastic sheet. So will glue that under rear door card. Trying to fit reversing camera but need to fing suitable spot. So if You have it fiited any help would be concidered. My last megane had it fitted in reg plate holder. so maybe in rear door handle.
Happy freelanding troops.
Happy freelanding troops.
tonytherunner
Active Member
I do not know at this time I want to be like the color closer to green light instrument panel ......
GrumpyGel
Well-Known Member
Door handle is probably a good idea - typically the metal behind it is very rusted out so plenty of access to run the wires though
Lukas430000
Active Member
Took mine down yesterday and apart one snapped bolt there is minimal amount of rust. It actually look like someone took care of reffiting rubber seal because it looked new. But cleaned it and refitted handle without hassle. either that or above rear window in the plastic trim. But i think spere wheel will obstruct view. and I do not really like to fit one of the truck ones with big metal holder.
