jamesmartin said:
pipes and bottle, has bottle got wires going to it as well
Click to expand...

Aye, the bottle has a pipe coming from it but thats accounted for (it goes into the right side of the injector housing).

I dont want to hijack this thread any more than I have already so will start my own thread about it!

Thanks to everyone who replied.

Ian
 
bushwwacker said:
Is it LPG? :confused2:

Sorry, I came into this late burt it looks like a pre YA-99999 k series with the,block moused thermostat, the,rubber hose from the rocker cover looks like a crank case breather to vent gasses back into the induction system.
Click to expand...

The large cranked pipe is the cam cover breather pipe. It is a factory fitted item ;)
There are a large number of small pipes that aren't factory fitted so I assume they are to do with the LPG system which I've only limited knowledge.
 
Thanks Nodge

I have started my own thread about it now. Hopefully someone who knows LPG systems will be able to tell me whats what.

Cheers

Ian
 
2003 TD4... Today I changed rear exhaust box, oil and filter, fuel filter and re-gassed the aircon (now Brrr!!)... a couple of days ago changed the clutch master cylinder... just aquired so going through the basic stuff and getting to know my new (to me...) Landy...
 
Same Shiite different day, got up, checked oil was in water, loaded with tools, filled roof rack, went to work, came home, unloaded gear.
 
Mended my intermittent wiper problem (wipers stopping wherever they want on the windscreen).
Another brilliant fix ....thanks Landy Zone ...well happy :)
 
Today I cursed it because the bastard drivers door has stopped unlocking with the key fob.

I intend to get to and grease up the mechanism as I can still hear it trying to work.

/meh
 
Spent 4 hours trying to repair the bl**dy N/S/F window regulator! - given up and ordered complete reg! There are easier ways to design and build window regulators!! AArrgghh!!!!
 
Put the brakes back and the real wheel after replacing a wheel stud on the nearside rear. It is possible without removing the hub!!! Thanks to other people on here who posted the bits and pieces of info needed.
Oh and drove five miles or so and found out my VCU (VDU??) was still cold when I got back so pleased about that.
 
well went to the shop today locks working fine.... come out the shop and the Drivers door not unlocking

after getting home taking it apart i thought balls went to the scrappers picked up another one while there a key fob


also noticed there was a arm rest type console in the car they have
 
gave up on trying to conect the radio to an MP3 reader so €6,50 at an asian tecnological speciality store it reads MicroSD cards and has an USB conection so I can charge the phone also,
didn't want to give up on the lighter so took the power feed from the back and made a plastic panel covering the ash tray, works OK



removed the rust and dents from speaker covers and painted in black matt
 
You must log in or register to reply here.

Similar threads

T
Help!
Replies
13
Views
537
Nodge68
Nodge68
B
Freelander TD4 Mk1 Rear Diff - Does anyone have any advice on how to replace the rear diff?
Replies
1
Views
173
Freddie17
Freddie17
R
LED side lights not working
Replies
9
Views
628
RickyFreelander
R
C
Rear wheel bearings or diff
Replies
11
Views
1K
Nodge68
Nodge68
L
Freelander 1 2005 Land Rover Freelander 1 HSE - Loose Gear Selector in Automatic Transmission
Replies
3
Views
565
Hippo
Hippo