sas1810
New Member
Went snd took SWMBO to the gym. Had a play in the snow. Got a loose heat shield and went to EAS FAULT! Stuck in wading mode till I turned it off and on again 5 minutes later. Hopefully it was just water getting in the contacts.
And since coming back to the UK, seems that the OBD socket doesn't like to play anymore. Only found out after trying to put Nanocom to ckear faults gor EAS. Something else to look at tomorrow.
And since coming back to the UK, seems that the OBD socket doesn't like to play anymore. Only found out after trying to put Nanocom to ckear faults gor EAS. Something else to look at tomorrow.
Bennybeanbear
Member
Went snd took SWMBO to the gym. Had a play in the snow. Got a loose heat shield and went to EAS FAULT! Stuck in wading mode till I turned it off and on again 5 minutes later. Hopefully it was just water getting in the contacts.
And since coming back to the UK, seems that the OBD socket doesn't like to play anymore. Only found out after trying to put Nanocom to ckear faults gor EAS. Something else to look at tomorrow.
have a look at the 5 amp fuse under the bonnet thats the obd power.
if that dosent work power your nanacom up with a power lead from cigarette lighter and see if that works it.
dogsbody
Very senior member
Went snd took SWMBO to the gym. Had a play in the snow. Got a loose heat shield and went to EAS FAULT! Stuck in wading mode till I turned it off and on again 5 minutes later. Hopefully it was just water getting in the contacts.
And since coming back to the UK, seems that the OBD socket doesn't like to play anymore. Only found out after trying to put Nanocom to ckear faults gor EAS. Something else to look at tomorrow.
With it going to wading mode and the OBD socket not playing I'd be looking for corrosion behind the socket and/or in the nearside pillar connectors.
sas1810
New Member
Wonderful! 5amp fuse had blown. Put new 1 in and full communication with Nanocom. Reset eas, calibrated hevac, tested other systems. All running good.
Thanks guys.
2.0_hippo
Well-Known Member
Wonderful! 5amp fuse had blown. Put new 1 in and full communication with Nanocom. Reset eas, calibrated hevac, tested other systems. All running good.
Thanks guys.
But what caused it to blow ...
sas1810
New Member
Thats what I don't know. Only thing I can think of is that when I got back to the UK, the battery was dead. Connected a charge pack and started it. Maybe connecting that caused it to blow.
Went over to my mums bugalow at Kirk Michael in the Isle of Man - as no electricity for four days whilst the village is cut off by the snow (mum is in a nursing home so she is ok) took severable goes to get into the drive but Range Rover did its bit. Masses of snow from the snow plough that managed to get a single lane through the snow to the villlage (north only and no south access yet)
sas1810
New Member
Ripped out the sub, cd changer and Alpine hu. Stuck them on ebay. Found all the wires had been hacked about for the stereo and speakers. Decided to get the whole thing replaced and go aftermarket on everything. Got a good deal on some pioneer equipment
Might have a sat nav screen for sale as well. Going to do something with that as well.
Oh! And tge cruise is working! Just no light on the switch
Might have a sat nav screen for sale as well. Going to do something with that as well.
Oh! And tge cruise is working! Just no light on the switch
Last edited:
2.0_hippo
Well-Known Member
Ripped out the sub, cd changer and Alpine hu. Stuck them on ebay. Found all the wires had been hacked about for the stereo and speakers. Decided to get the whole thing replaced and go aftermarket on everything. Got a good deal on some pioneer equipment
Might have a sat nav screen for sale as well. Going to do something with that as well.
Oh! And tge cruise is working! Just no light on the switch
make sure you take some piccys
sas1810
New Member
2.0_hippo
Well-Known Member
sas1810
New Member
all of it !!
with detailed description of all the process
Well there won't be much to see from the speakers. Managed to get some that fit in the lower casings. Nice 2 ways with separate tweeters. Can have the same in the back but deciding if to mask the tweeters into the B post, or leave them off completely. If I can get a deal on the 4 way amp, might consider fitting that where the original DSP was.
2.0_hippo
Well-Known Member
couldnt have you kept the original speakers ? and used crossovers ?
or dont you have the HK system ?
sas1810
New Member
I could've done it that way, yes. But I got the component kit for less than £50. And the bass/mid speakers fit direct into the plastic pods.
And yes. Its the full HK system. But like I said, the po had a Sony hu and it was all hacked about behind the dash and along the loom to the dsp.
