Now, to tackle the bulkhead i couldn't get in with the grinder as you can see i tried but failed miserably hehe. so a lot of sanding down and B&Q's own paint stripper which by the way is SH*T only used this as ran out of nitromorse :( took way too long haha
C7C45A3F-93C2-4176-9F3C-B26840286137-7934-000006A102C57D50_zps32e00892.jpg
 
Primed up the bulkhead, i used a Halfords rattle can for this as i hadn't any normal primer still did the job tho :)
880DB685-35B7-4676-922C-2B474CCA8F01-3197-000003818B55E0AF_zps56d5bcf1.jpg
 
First coat of paint
1459DE36-1850-47D7-BE34-18AFDF7B3562-8057-000006AC6B1D9811_zpsba380c6f.jpg

I apologize for the blurriness on this pic im using an iphone but cant tell untill i upload the bugger.
32AB5EDB-0E16-41C1-BD0F-9FC5774B91A5-8057-000006AC9A0773FA_zps7fa5e70f.jpg

8E88A8AF-186D-462A-B58C-5C1E773A868C-8057-000006AC8651F981_zpsede3f4c5.jpg
 
Last edited:
Roof off with many bolts snapped, what a nightmare it was.
729CF7D4-BFE0-4D5C-B5B6-1B1D887F7ED2-3777-000003CF3FC93DBD_zpse30ca788.jpg

Lets see what this roof has in store for me..... Oooof thats alot of grinding looks like its been sat in a pond for years on end with all that algee
4F0EC6EB-854D-46BF-9972-870789A09D1D-3777-000003CF92AC0AF8_zps52b50363.jpg
 
Last edited:
have you ever tried a grit gun for paint removal?

might be a tad expensive for the roof but easier than rubbing all that area

just curious, thinking of trying that myself
 
honolulujoe said:
have you ever tried a grit gun for paint removal?

might be a tad expensive for the roof but easier than rubbing all that area

just curious, thinking of trying that myself
Click to expand...

Yes mate i do have a grit gun but would take way too long and be an expensive and messy job i will be saving the grit gun for my wheels :)
 
Neat all purpose cleaner should shift that algae, failing that order some trash wash - slightly acidic stuff which they spray n lorry chassis to clean. I suspect the paint will be very thin / almost none existent after a clean up. Most of mine was bare slightly pitted metal. It was then etched, then water based primer followed by two pack top coat and looks new again.
If you haven't got one It might be worth buying a cheap dual action rotary sander and coarse pads - shifts paint quickly
 
Land Raver said:
Neat all purpose cleaner should shift that algae, failing that order some trash wash - slightly acidic stuff which they spray n lorry chassis to clean. I suspect the paint will be very thin / almost none existent after a clean up. Most of mine was bare slightly pitted metal. It was then etched, then water based primer followed by two pack top coat and looks new again.
If you haven't got one It might be worth buying a cheap dual action rotary sander and coarse pads - shifts paint quickly
Click to expand...

pressure washing took all the algae off my roof along with a lot of paint, i guess from getting so much sun exposure
 
if you are sanding back top coat just to give a surface for the new paint to attach too, couldn't you just top coat it and not use primer, in the interests of my own idleness of course :)

more thinking of my s1 which is nato green but tatty, i just want to give it a quick once over.
 
Been busy with other stuff so aint been able to do much as would of liked but here is where i am at atm.
3E369D61-821B-4583-8B34-1E4CBB6FB2CB-9245-00000812A387EAE3_zps9c25f5db.jpg

C960AAB4-31B5-481A-80A3-09EA62B5B4DA-9245-00000812B0AF5785_zpsb05f1a09.jpg

1078BFFA-500A-4D2C-8A19-64F4C8818E92-9245-00000812C02A5182_zps595d94ac.jpg
 
You must log in or register to reply here.

Similar threads

Inner Farmer
Series 3 floor boards
Replies
0
Views
507
Inner Farmer
Inner Farmer
Inner Farmer
Series 3 floor boards
Replies
7
Views
980
Inner Farmer
Inner Farmer
D
Series 3 Leg Room
Replies
5
Views
818
steve2286w
steve2286w
S
Removing oil seal on engine front cover
Replies
2
Views
600
steve2286w
steve2286w
Aflyingduckling
Series 3 Fuel Pipe Issue (part 564902)
Replies
1
Views
578
steve2286w
steve2286w