Few piccys sump being cleaned of gunk and wax oil which has protected it like new no rust which is unusual for a 300 sump
b26e1b248b5a3338b7dfc8e264841598.jpg
d8b9502350dc6497a012e49cbea3cff8.jpg
f69511cadb90c52d17b3ed1e151d5928.jpg
that's all for now block is away being rebored and head has been sent for pressure test and re face if it tests ok then will lap valves and change stem seals engine had over heated so badly that it only had compression on 1 cylinder so not holding much hope of salvaging the head but they are known for being pretty resilient ��������
 
Last edited:
Update block back and I've fitted new Pistons ,bearings and core plugs and of coarse the obligatory coat of paint [emoji106]all ally parts have been cleaned then etch primed ready for a coat of silver few piccys more as and when I do more
b9f3f9fc4071346d62abcbcb80ff6627.jpg
5e48ef55ab186fcc5b41cbfe1982829b.jpg
80e9570b7f60d253e29305e980c26d06.jpg
d31918d6a5f7ee4feb144dcdcbce682c.jpg
74ba79d240efc85ccfc6cbed8c8be6c0.jpg
16f3477ad5e7fea93ae2ba88cd6aa3a7.jpg
cf3a633768287dfa465f6e182c0f3db1.jpg
591e5e968a7e893b03f1526769e5fa76.jpg
 
Re plated all bolts nuts studs etc and injector brkts for £15 [emoji106][emoji106][emoji41]
 
You do realise you could be on the verge of rebuilding the first landy without an oil leak!!and i really hope you achieve it. work of art.:clap2:
 
I don't follow many rebuild threads really. But this one for some reason I have. And I'm so glad I have done!
Keep up the good work GATSO. Very impressed and hope to eventually do similar myself one day
 
Thanx guys ! prob get head cleaned and painted next week then fit !! Then its on to the r380 strip and rebuild ,bit unsure about that not rebuilt a box since I was a wee boy thanx again all
 
Thanx guys ! prob get head cleaned and painted next week then fit !! Then its on to the r380 strip and rebuild ,bit unsure about that not rebuilt a box since I was a wee boy thanx again all

I rebuilt an lt77 last year and found it much easier than I thought it would be having never had a gearbox that far in bits before.
Not an r380 I know, but doubt they're that different. Although I do fancy having a bash at a r380 at some point too.

Oh and cracking work as usual :)
 
Brilliant work mate, what paint are you using in the engine? Hopefully going to be doing something like this with mine. Also is the engine on a stand or just on a work bench?
 
Paint is engine enamel and lacquer it's fixed to an heavy duty eng. stand works a treat and it will also fit my gearbox when that gets fone
 

Similar threads