smckeown73
Active Member
I fancy some side windows also. Which ones are those?
m1hgv
Member
well done sam just read through this thread from the begining , got to say hats off to you ,
exellent work , it does look better imho with the side windows, and the wolfs look great black
again well done and keep the updates coming it gives me hope and inspiration while im nursing my mondeo elbow (long story )
ohh and all the best for the new year
martin
exellent work , it does look better imho with the side windows, and the wolfs look great black
again well done and keep the updates coming it gives me hope and inspiration while im nursing my mondeo elbow (long story
)ohh and all the best for the new year
martin
Defender-Sam
New Member
those are genuine land rover ones, craddocks had them on there ebay site there both nearside so one is fitted backwards but they do the job without breaking the bank.
Defender-Sam
New Member
well done sam just read through this thread from the begining , got to say hats off to you ,
exellent work , it does look better imho with the side windows, and the wolfs look great black
again well done and keep the updates coming it gives me hope and inspiration while im nursing my mondeo elbow (long story
ohh and all the best for the new year
martin
Thanks Martin glad you enjoyed it, its changed a little now though.
new wheels only wanted tyres but couldn't resist the ZU's fitted with 265/75/16 bf goodrich all terrains
Safari snorkel fitted
erberspacher night heater no nock of the chill on these cold mornings,
Sam
Defender-Sam
New Member
depends what do you need to know, not got any pictures but i can take you some tomorrow if you want. basically its an eberspacher D2 airtronic purchased of ebay removed from a utilities van so supplied with all the ducting/wiring and fuelling parts. couldn't decide where to mount it I've got a tool box on one wheel well and a bench seat on the other one so that left the load bed floor but wasn't happy about loosing load space and having a big battery meant the battery box was out of the question as well. in the end i sacrificed passenger leg room
and fitted it behind the passenger seat up against the bulkhead on the flat part drilled holes for the combustion air intake and exhaust and ran the fuel pipe across the underside of the seatbox to fuel tank where its tapped into the tank with a suction tube. then the controller in this case fully programmable 7 day timer (i just use the on and off) is screwed onto the bulkhead and the heater ducting passes through one of the two rectangle plates riveted to the bulkhead and cable tied to the bulkhead and passes through another hole to a direction vent on front of the bulkhead. it gets it pretty warm in around 3 minutes but once turned off its gets cold even quicker but thats more than likely just because my motor is draftier than most 
aaronmorris
Head's a shed
Top work, I really like the look with them zu's on
Defender-Sam
New Member
Top work, I really like the look with them zu's on
cheers Aaron yeah i quite like them.
i wouldn't bother it rattles and leaks when it rains
thanks its not carpet its exmoor trims moulded matting, its expensive but worth it in my opinion.
haha yeah always brings a smile to my face when driving it :high5:
aaronmorris
Head's a shed
cheers Aaron yeah i quite like them.
As much as I like the wolf's you had on before I think these make it stand out of the crowd a bit more. Without being to bling about it
Defender-Sam
New Member
As much as I like the wolf's you had on before I think these make it stand out of the crowd a bit more. Without being to bling about it
yeah they fit easy as well unlike the boost alloys my mate brought at the same time, he's had nothing but problems with them
aaronmorris
Head's a shed
yeah they fit easy as well unlike the boost alloys my mate brought at the same time, he's had nothing but problems with them
What problems is he having with them? Should bolt straight on provided he hasn't got a drum brake back axle.
Defender-Sam
New Member
well no he's got a disco back axle so discs but its a very early 90 1984 craddocks said they would fit and so he payed for them and let them fit them but after about 40 mins he came through to tell us they wouldn't fit and he would need spacers so reluctantly he agreed and they put them on, only for him to take them off to do something to his swivels only to find they were stuck on and had to knock them off with a sledge hammer. seems they gunned them on and gouged out the inside of the rim on the drive member bolts he phoned them to ask why they still fitted them and the guy in the workshop said ohh yes i know what our fitter hasn't done grind the heads down on the bolts
far to say he hung up and they've lost our custom but they still don't seem to fit the back axle
aaronmorris
Head's a shed
well no he's got a disco back axle so discs but its a very early 90 1984 craddocks said they would fit and so he payed for them and let them fit them but after about 40 mins he came through to tell us they wouldn't fit and he would need spacers so reluctantly he agreed and they put them on, only for him to take them off to do something to his swivels only to find they were stuck on and had to knock them off with a sledge hammer. seems they gunned them on and gouged out the inside of the rim on the drive member bolts he phoned them to ask why they still fitted them and the guy in the workshop said ohh yes i know what our fitter hasn't done grind the heads down on the bolts
Sound like cowboys to me
30mm spacers should of solved the problem even if it was an early axle.
Are they after market boosts then? Maybe there slightly different to the originals.
Defender-Sam
New Member
Sound like cowboys to me
30mm spacers should of solved the problem even if it was an early axle.
Are they after market boosts then? Maybe there slightly different to the originals.
yeah they still don't fit theyre just in his garage now he's lost interest in them, I've put it down to poor rims they're the ones craddocks sell but they assured us over the phone that land rover buy them when they run low at the factory
but they won't even fit on the back axle so there something dodgey going on once he's cheered up a bit were going to compare them to a genuine one
aaronmorris
Head's a shed
yeah they still don't fit theyre just in his garage now he's lost interest in them, I've put it down to poor rims they're the ones craddocks sell but they assured us over the phone that land rover buy them when they run low at the factory
Fair enough, Hopefully you can get them to fit. If not Id be sending them back if it was me
noggin
Member
excellent read and excellent job! well done mate really enjoyed this.
By the way i happen to have exactly the same winch and mount set-up. The H12 and really heavy duty winch tray.
I dug out the receipt from when the previous owner fitted it new. and apparently the mount is called a 'TOWNSEND WINCH MOUNT' although nothing comes up on google. Guess it probably used to be a small metalwork business or something a few years ago, maybe had links to mile marker as yours is the only other one i've seen?
Anyway it wasn't cheap. Cost £145 in 2001 and along with the H12 and fitting kit came to over 1300!! Its a very very good bit of kit, mine will probably outlive my 90.
All the best
Nick
By the way i happen to have exactly the same winch and mount set-up. The H12 and really heavy duty winch tray.
I dug out the receipt from when the previous owner fitted it new. and apparently the mount is called a 'TOWNSEND WINCH MOUNT' although nothing comes up on google. Guess it probably used to be a small metalwork business or something a few years ago, maybe had links to mile marker as yours is the only other one i've seen?
Anyway it wasn't cheap. Cost £145 in 2001 and along with the H12 and fitting kit came to over 1300!! Its a very very good bit of kit, mine will probably outlive my 90.
All the best
Nick
