After all the rain cleared I took a look at the wire to the sensor on injector four. Where it goes into the injector the insulation looks a bit split. And then I found one of the wires coming out of the connector had broken off. So I shall have to add a new length and see whether that cures it. Otherwise I shall take out injector four and check that closely.
 
BigJessie said:
After all the rain cleared I took a look at the wire to the sensor on injector four. Where it goes into the injector the insulation looks a bit split. And then I found one of the wires coming out of the connector had broken off. So I shall have to add a new length and see whether that cures it. Otherwise I shall take out injector four and check that closely.
Click to expand...

You need a window socket to get it out so you don't crush the wire - which is what seems to have happened.
 
You must log in or register to reply here.

Similar threads

Flossie
P38A On going leak off issue, driving me mad!
Replies
14
Views
1K
Flossie
Flossie
jimmacD
Back to the P38 house of pain!
2
Replies
21
Views
2K
Grrrrrr
Grrrrrr
Randometer
300 TD Engine - Fuel Injection Leak - Help.
Replies
10
Views
1K
Randometer
Randometer
F
2001 P38 2.5 Diesel EKA Via NANOCOM
2
Replies
35
Views
2K
Datatek
Datatek
JT_spark
P38 DSE FIP issues
Replies
6
Views
1K
stemac33
stemac33