After all the rain cleared I took a look at the wire to the sensor on injector four. Where it goes into the injector the insulation looks a bit split. And then I found one of the wires coming out of the connector had broken off. So I shall have to add a new length and see whether that cures it. Otherwise I shall take out injector four and check that closely.
 
BigJessie said:
After all the rain cleared I took a look at the wire to the sensor on injector four. Where it goes into the injector the insulation looks a bit split. And then I found one of the wires coming out of the connector had broken off. So I shall have to add a new length and see whether that cures it. Otherwise I shall take out injector four and check that closely.
Click to expand...

You need a window socket to get it out so you don't crush the wire - which is what seems to have happened.
 
UnitLandy said:
Thanks chaps. Fortunately I found this set. Hopefully it's the right one.

www.ebay.co.uk

SEAL KIT INJECTOR PUMP BOSCH 2 467 010 003 P NEW OE REPLACEMENT | eBay UK

Are you completely sure this is a right part for you? Send us your vehicle identification number (VIN) or vehicle registration plate number and our highly qualified consultants will help You! Read more to see item specifications, original (OEM) codes, references and compatibility table!.
www.ebay.co.uk
Click to expand...
Only just seen this as have been away. Thats the correct part number. I got one from SoAuto in Northampton in June off ebay
 
You must log in or register to reply here.

Similar threads

Rubberknees
Top gasket seal for P38 diesel FIP
2
Replies
21
Views
2K
Mark Piercy
Mark Piercy
Rubberknees
P38 diesel turbo
2
Replies
32
Views
2K
ovalandrover
ovalandrover
Flossie
P38A On going leak off issue, driving me mad!
Replies
14
Views
2K
Flossie
Flossie
hawky666
Water leak from 300tdi
Replies
5
Views
626
Forrest Gump
F
R
P38A P38 2.5 Coolant leak
Replies
6
Views
702
Mark Piercy
Mark Piercy