WhiskyLassie
Well-Known Member
Hello weekend you are very welcomed
I had the same issue and using a separate power supply fixed it
Nope, brand new out of the box. If I pass a North-pole of a magnet past it the LED on the sensor blinks (as it should).
It ought to be fine. Maybe the VFD is interfering with it electrically.
Indeed, see my previous post. The sensor needs a clean supply
I did say eye nose nuffin about them
Stone56
Well-Known Member
Had a simler problem just check the filter behind it should be a impeller and should move freely if its jammed it will not go to the next cycle ours was jammed with a bullet the W missed in my pocketLoosing the will to live
Washing machine wont drain now, switched it off for a bit hoping that it might re set but it wont drain.
Could do with an update anyway so looking for a good washer dryer cheap ,,, anyone ?
Stone56
Well-Known Member
but nice motor what did you say your address was 
Stone56
Well-Known Member
I'm a Beretta manIβve always fancied a Thompsons with a drum magazine if anyone has one lying around
Stone56
Well-Known Member
Bird ?Pulled on to the A2 eastbound this afternoon and something hit the drivers door, had a look around then realised the door mirror had no reflective glass in it
The backing is there, so not sure what happened
Dunno there was no cloud of feathers which normally signals a bird strike
Thanks, I'll take it outdoors and drain it
Welcome to world of "we don't care about you but as long as it sells...."... that I am shocked that since Grenfell towers ANY window placed in a domestic property that is <1M from the boundary MUST be 30 minute fire resistant.
This is a huge cost uplift. Even IF the neighbours property is >2M from the same boundary. This is NUTS IMHO.
Littlun might fink is a bit scary
