have you tried hammering around the tube to break the rust where the thread is and then spread the split a tiny bit with a chisel and then clamp tube in a bog vice and use a piece of tube on the balljoint to unscrew it.
 
I got one of the HD ones from paddocks after buying new ends and no being able to get them out :( But the HD one defiantly looks up to the task
 
have you tried hammering around the tube to break the rust where the thread is and then spread the split a tiny bit with a chisel and then clamp tube in a bog vice and use a piece of tube on the balljoint to unscrew it.
I have done three track rod ends today with the method you suggest. I did clip a curb the other week and wreck a rim- I think it has buggered the thread on that side- I have spent hours with it in a vice trying to lever it of, soaked it for hours in WD, but it isn't shifting:(
 
Morning lads, im in Barnet north London. Really want to give some lanning a go. any of you lot near the london side of Hertfordshire?

Cheers ben

There are a few of us around Hemel, thats about your closest. Mine is still a long way off finished but defenderdog1, djdommyp, killajoules are with working vehicles and go out now and again. There is a pub meet in dunstable this Wednesday, doubt I will be there but the others might and they are a good crowd.
 
Spyderman

Would you have a steering rod I could buy of you? I have tried changing my track rod ends and cannot get one of them out - it is the side that had the impact so I suspect it has been pushed in/ wrecked the threads.

Steve
Gratis mate, I was only going to throw them away
 
Had a drive round whaddon with spyderman. Mind you dont get stuck.!!!
age6e2er.jpg
u8eha7ep.jpg
 
Can anyone direct me to some lanes in the Hertfordshire area? or is anyone willing to show me a few?
Based in Cheshunt/Hertford area so would be great to get to know some of the local landy lot,:D

Dan

hay u just down the road from me, am stanstead abbotts.
 
Not sure if I'll make the pub tonight, treatment day.
I'm going to Peterborough on Sunday, was going to be Saturday but BiL can't do Saturday.
 
Working every night till Tuesday
So can't do the pub
But if I can Finnish early Saturday or Sunday I mite go to the show after work
 

Similar threads