I've just taken it over the pit and I have just found oil drops all around the vacuum pump which have been dripping down onto the top of the engine mount and front diff. Hence no marks on the floor :doh:

Filled the oil back up to max mark, cleaned vac pump all up with thinners and will take it out tomorrow and see if the oil re-appears. I might even wrap a white rag around it and tie it in place then I'll see how much oil (if indeed it is where it is coming from) has leaked out.

Fookin thing :mad:
 
Ah my Vac pump leaks, changed the gasket and it still does it :rolleyes:

Think its the actual pump as it appears to be dripping off the casing :doh:
 
Gents don't worry to much about oil leaks if it's not ****ing out your ok there land rovers after all :D they all leak oil, there's an old landy saying ( if there's no oil under it there's no oil in it:D)
 
wangie46 said:
Gents don't worry to much about oil leaks if it's not ****ing out your ok there land rovers after all :D they all leak oil, there's an old landy saying ( if there's no oil under it there's no oil in it:D)
Click to expand...

The problem is that it is costing me more in oil than it is in diesel lol!
 
Tuskenraider said:
Finally finished my 2" lift

254682_208778409180118_100001438828659_603333_986971_n.jpg


262453_208778132513479_100001438828659_603331_7032389_n.jpg


Would have finished sooner but had my stag do over the weekend and only felt human again today :D
Click to expand...

looking good!!
 
wangie46 said:
Gents don't worry to much about oil leaks if it's not ****ing out your ok there land rovers after all :D they all leak oil, there's an old landy saying ( if there's no oil under it there's no oil in it:D)
Click to expand...


Yep, i have a sticker on mine thats says 'Landrovers dont leak oil, they are just marking their territory' :D


thanks Geoff :)
 
Picked up me welder today, will be asking loads of questions on the whys and wherefores
cause i know FA about welding.
 
Had itchy fingers today and nearly bought a 300tdi 110 :) Note I said nearly, had to walk away as I really couldn't justify it at the moment. But as I've started looking, I don't think it will be long :D :D

Getting shot of my old Transit soon. Gonna give it a Viking send off then will look at sorting the Disco 100% and then I can get a new toy!

Also, Chris/Nick/Mike, can you confirm anything about Wednesday?
 
matthew2riches said:
Had itchy fingers today and nearly bought a 300tdi 110 :) Note I said nearly, had to walk away as I really couldn't justify it at the moment. But as I've started looking, I don't think it will be long :D :D

Getting shot of my old Transit soon. Gonna give it a Viking send off then will look at sorting the Disco 100% and then I can get a new toy!

Also, Chris/Nick/Mike, can you confirm anything about Wednesday?
Click to expand...

Wednesday MCD Braintree @ 20:00
I suspect you won't be in a green rust bucket ;)

As Drizz said can we head straight off. I need to start heading home by 23:00. I'm happy with the local lanes. Starting to get to know them well :D

Who else is coming?
 
Discodad said:
I suspect you won't be in a green rust bucket ;)
Click to expand...

I'd be careful as Stu is bigger than you ;) He is very fond of his Disco - you might upset him :alien:

And if you were referring to mine then I am 2nd Dan Martial Artist ;)

:eek:

If the boot floor comes out over the weekend then I won't be coming. If it stops in then I'll pop down and have a play.
 
Did we ever explore the routes further north of Braintree? Game for going were we go normally but always good to try new areas.
 
matthew2riches said:
I'd be careful as Stu is bigger than you ;) He is very fond of his Disco - you might upset him :alien:

And if you were referring to mine then I am 2nd Dan Martial Artist ;)

:eek:

If the boot floor comes out over the weekend then I won't be coming. If it stops in then I'll pop down and have a play.
Click to expand...

:lol::lol::lol::lol: Perhaps I was referring to the fact all the rust has been removed :rolleyes:

I know mine is an old rust bucket and as Mikey said 'the paintwork looks like its got aids' But I still love it (well sometimes :doh: )

Still I've been hankering for a 90 soft top since before I got the Disco.
This one LINK has been for sales for 2 - 3 months, its dropped froom £5500 to £4000, its 2 miles up the road from me and he may swap + some cash for a late 300 tdi Disco. Almost meant to be... apart from not enough ££££ & I wouldn't want to leave it on the main road for fear of theft or vandalism.

Hope you make it on Wednesday.

Chris, I'm more than happy to try some new lanes!
 
Turns out my clicking and knocking are the front prop UJ's ****ed!!! Yey! At least it isn't the CV
lol.gif


Ordered a couple of genuine ones so that'll be another job to do :doh: :doh: :doh:
 
Pressed in some new UJ's last night. God does a huge workshop press save hammering and hurt fingers!

Then this morning Stu came round and touched my plasma cutter again............

6062847828_8bf801764d.jpg


It then, in the usual fashion started to rain so Stu went home and I broke out the wire brushes on the grinder.........

6062849076_8ea5c81ebb.jpg


6062848454_0f004b2297.jpg


Tomorrow should see rest of panels cut out, chassis wire brushed all round on rear and painted, sedimentor removed as well as 2 new floor side panels welded in. I will then sort out the paint boot floor during the week.
 
Last edited:
matthew2riches said:
Then this morning Stu came round and touched my plasma cutter again............

6062847828_8bf801764d.jpg


It then, in the usual fashion started to rain so Stu went home and I broke out the wire brushes on the grinder.........
Click to expand...

there's always tomorrow.......... finger at the ready, I am wondering looking at the pic looks like there still a bit of surface rust on the chassis, wondering if rust converter is worth a thought before painting ?
 
Big Stu 12 said:
there's always tomorrow.......... finger at the ready, I am wondering looking at the pic looks like there still a bit of surface rust on the chassis, wondering if rust converter is worth a thought before painting ?
Click to expand...

I'll get a grinding wheel on it tomorrow then we'll go over it with that stuff we bought followed by some paint.
 
You must log in or register to reply here.

Similar threads

Freddie17
Kent laning 5th?
Replies
7
Views
1K
Freddie17
Freddie17
dazer200
L322 ABS, HDC, Suspension, Gone ! FIXED
2
Replies
33
Views
7K
Saint.V8
Saint.V8
BulletBrindle
How I fixed my TD5 ECU (maybe worth doing for preventative reasons too)
2
Replies
33
Views
9K
BulletBrindle
BulletBrindle
Grim
Discovery 2 Looking to swap......
Replies
0
Views
1K
Grim
Grim
P
Disco 3 (LR3) Bought A Disco 3 yesterday...haaaalp!
2
Replies
20
Views
3K
hoopfish
hoopfish