wickford90 said:
Hi Mark, this aint a sales pitch, but if any of your guys want the waffle boards i will keep them a set or two back, and you can pay as and when, because i am going to start to sell them.
£ 45 quid a set 1000 x310x50mm. got five sets to shift.
Click to expand...

The next SLROC driving day is the 17th Sept.
I'm sure you would be able to shift a few sets there (not sure on rules?), but their forum has a for sales section.

BTW who is planning on going. I'm actually free (for a change) and will be making the most of pre MOT landy fun.

Matt, don't put that welder down just yet ;)
 
wickford90 said:
OK Matt, lie down take deep breaths, and visualize tranquil places.There feeling better already. NO!! STOP thinking about welding, think about big breasted girls with tight hot pants [wielding a gas axe].
Scuse me just got to pop out for a minute.
Click to expand...

Thats better, now you have his attention.
 
Discodad said:
The next SLROC driving day is the 17th Sept.
I'm sure you would be able to shift a few sets there (not sure on rules?), but their forum has a for sales section.

BTW who is planning on going. I'm actually free (for a change) and will be making the most of pre MOT landy fun.

Matt, don't put that welder down just yet ;)
Click to expand...


I be there, that is the weekend after peterboro show. Would like to shift them before then if poss, any takers let me know
 
wickford90 said:
OK Matt, lie down take deep breaths, and visualize tranquil places.There feeling better already. NO!! STOP thinking about welding, think about big breasted girls with tight hot pants.
Scuse me just got to pop out for a minute.
Click to expand...

I'm going to lay my new carpet tomorrow in the bedroom. Got 3 alcoves and a chimney breast to play round. Should make a nice peaceful day :) No welding - I promise :eek:
 
matthew2riches said:
I'm going to lay my new carpet tomorrow in the bedroom. Got 3 alcoves and a chimney breast to play round. Should make a nice peaceful day :) No welding - I promise :eek:
Click to expand...

Clear the room of all furniture it will make the job so much easier. If you need any help or advice give me a call.
 
By the way a few pics of my newly redone work shop and workbench at home, at last i can see the floor.
 

Attachments

  • IMG_0513.jpg
    IMG_0513.jpg
    236.7 KB · Views: 129
  • IMG_0514.jpg
    IMG_0514.jpg
    237.8 KB · Views: 175
Looking good geoff. Only thing from an H&S point of view is petrol cans high up as petrol vapour is heavier than air. They should be on the floor lol. Got a bollocking at the workshop for doing that ha ha ha.
 
matthew2riches said:
You can come and have some rusty disco envy if you like. I'll be here at the weekend with Stu we'd both recommend you came over for a few hours to look at the amount of work involved ;)
Click to expand...

My in-laws have said I can leave it at their's whilst i weld it.
Just keeping an eye open for a 2nd hand mig.
I think / hope I only need to get one arch done. The rest will hopefully pass and then I might start a complete overhaul in the spring (only time of year its ever dry now).

Where did you & Stu get your panels?
 
Discodad said:
My in-laws have said I can leave it at their's whilst i weld it.
Just keeping an eye open for a 2nd hand mig.
I think / hope I only need to get one arch done. The rest will hopefully pass and then I might start a complete overhaul in the spring (only time of year its ever dry now).

Where did you & Stu get your panels?
Click to expand...

I got my panels from the local Land Rover dealer.

I think all of Stu's came from Landy Part.
 
Discodad said:
My in-laws have said I can leave it at their's whilst i weld it.
Just keeping an eye open for a 2nd hand mig.
I think / hope I only need to get one arch done. The rest will hopefully pass and then I might start a complete overhaul in the spring (only time of year its ever dry now).

Where did you & Stu get your panels?
Click to expand...

Just make sure we don't bid against each other, have lost out on a couple of migs last week.
 
Discodad said:
The next SLROC driving day is the 17th Sept.
I'm sure you would be able to shift a few sets there (not sure on rules?), but their forum has a for sales section.

BTW who is planning on going. I'm actually free (for a change) and will be making the most of pre MOT landy fun.

Matt, don't put that welder down just yet ;)
Click to expand...

I am going, as I should Have the MOT by then:rolleyes::rolleyes:, I'll be ther on the Saturday as well as its RR Training.

matthew2riches said:
I will end up getting my gas axe
Click to expand...

Did I hear the words Gas Axe......


Nice work shop Geoff I now got workshop envey...
 
I've been a bit naughty :rolleyes:. Woke up early hours so I thought I'd get the carpet down. That's done now so I sat twiddling my thumbs and slowly shuffled outside....... and got the welder out :eek:

Inner sill is now sorted thank fook. So just left to do now is put the outer arch on, weld in seat brackets then clean up and seam seal - then I can slap some red oxide on and paint :D

I'll wait a little while before I start the other side I think. Have some fun in it to cheer me up :)

I'm planning to be down at the ladies driving challenge at the start of September, letting women drive it :eek:
 
You must log in or register to reply here.

Similar threads

Freddie17
Kent laning 5th?
Replies
7
Views
1K
Freddie17
Freddie17
dazer200
L322 ABS, HDC, Suspension, Gone ! FIXED
2
Replies
33
Views
8K
Saint.V8
Saint.V8
BulletBrindle
How I fixed my TD5 ECU (maybe worth doing for preventative reasons too)
2
Replies
33
Views
10K
BulletBrindle
BulletBrindle
Grim
Discovery 2 Looking to swap......
Replies
0
Views
1K
Grim
Grim
P
Disco 3 (LR3) Bought A Disco 3 yesterday...haaaalp!
2
Replies
20
Views
3K
hoopfish
hoopfish