Hi mate

Great job there as always

daft question plse, do u need to put a vent into the fuel container
 
Hi mate

Great job there as always

daft question plse, do u need to put a vent into the fuel container

Cheers! I think so yes, the cap has a vent in it so all good.

Darn you!!!, I had to buy a range rover to be able to do that!!!...LOL. :p

Cheers

This was a hell of a lot cheaper!!! Kicks out some serious heat!

Only thing is though ive added so many more leccy things than planned ive overrun the fuse box! Will need a second one if anything else goes in. That or a massive tidy up!
 
Few more pics from LRP i finally got off my SLR

20191029_215154.jpg
20191029_215122.jpg
20191029_215008.jpg
20191029_214528.jpg
20191029_214349.jpg
20191029_214258.jpg
20191029_211405.jpg
IMG_1523.jpg
IMG_1476.jpg
IMG_1709.jpg
IMG_1691.jpg
IMG_1676.jpg
IMG_1665.jpg
IMG_1557.jpg
 

Attachments

  • 20191029_215154.jpg
    20191029_215154.jpg
    154.2 KB · Views: 155
  • 20191029_215122.jpg
    20191029_215122.jpg
    206.3 KB · Views: 143
  • 20191029_214528.jpg
    20191029_214528.jpg
    104.9 KB · Views: 160
  • 20191029_214349.jpg
    20191029_214349.jpg
    317.4 KB · Views: 146
  • 20191029_211405.jpg
    20191029_211405.jpg
    230.7 KB · Views: 168
Finally got round to some maintenance post Land Rover Party.

Front hub was removed and CV filled with proper CV grease. Also filled with One Shot + a new swivel seal.

All came apart nice and easy. Went back together easy too. Getting quite quick at doing these :oops::p:D
View attachment 191619

Also swapped the TX box output seal as its been weeping for a while and made a discovery....

View attachment 191621 View attachment 191620

Looks like the torque has been bending the bolts sideways over the past year or so :eek: Luckily I had a spare set! So replaced along with a new seal. Hopefully no more leaks!

Clutch Master changed AGAIN for a new TRW unit. Bled through again hopefully this one lasts.... :rolleyes::rolleyes:

Finally new LED headlights, been on the fence about them for a few weeks but I really like them!

View attachment 191622

Much brighter, much better spread and much more clear light. Think I adjusted them pretty well, no one flashed me at leased. That said I think they may be a little high.

Didnt have a chance to wire in the side DRLs but ran the cable so will be easy when i get some time.

Imo think led headlights look sh!te on fenders anyway.

Changed your mind then
 
Thanks :D

It has wide front ones. Rear ones kept getting torn off so stopped bothering. The Gywn Lewis QD ones are too narrow
 
Front ATB is in! Quite a faf but actually went really smoothly. Especially as my mate helped!

Lucky too as the old one is in bad shape. Heavy play on the CW and the pinion moves up and down about 5mm :eek:

Safe to say that bearings shot!

Almost zero backlash now and everything feels a hell of alot smoother and tighter that said only driven 5 miles so real test tomorrow
 
So over a year later and I catch this on Facebook -
20191112_171030.jpg


That 110 belongs to the amazing couple that brought me a starter motor when mine went bang en route to LRP last year!

Also gave some damn impressive driving on the Supertrack Event - which reminds me i should upload the video!!
 

Similar threads