MHM Lecky fan fitting in piccies

The Mad Hat Man · Oct 14, 2007

Here you go - I will attempt to do a proper write-up when I have time. FYI it is a Peugeot 306 Fan.

for this you will need the 306 fan & cowl. the radiator (for the switch fixing), the fan switch and loom (from fan to rad) and the loom from the fan cowl to the n/s wing- get as much as you can.

The Mad Hat Man · Oct 14, 2007

and some more....

Cabbie · Oct 14, 2007

Can a fan be mounted on the engine side of the radiator?

The Mad Hat Man · Oct 14, 2007

not really - not enough room. Why would you want to - there is hardly any room - but tons between the rad and the front grill.

slob · Oct 14, 2007

will the rad be big enough?

The Mad Hat Man · Oct 14, 2007

yu only need the 306 rad fur the thermo switch fitting and its mounting block - not to use as a rad - yu use the series rad.

slob · Oct 14, 2007

so why say yer need the rad and the switch? shirley yer can see how thats a tad misleading?

The Mad Hat Man · Oct 14, 2007

coz if yu furget the rad - its a bugger to fit the switch into summat else. If yu get the 306 rad - yu can cut out and re-use the switch mount fur the 306 thermo switch

.

slob · Oct 14, 2007

so yer dint need the rad , just the switch and switch mount

The Mad Hat Man · Oct 14, 2007

ffs this is hard - the switch is mounted in the radiator on the 306.

here is a pic fur those wot dont unnerstand.

slob · Oct 14, 2007

aye so yer dint need the rad just the small part wiff the mount in it.

The Mad Hat Man · Oct 14, 2007

Yup - but if yu forget to get the rad - like wot i did - yu have to go find one.

In fairness - I aint used this bit yet - but its better to have it and not use it then not have it when yu do need it - ?

Grippa · Oct 14, 2007

So the rad then, as a percentage, how much of it's total mass do you achally need?

slob · Oct 14, 2007

am thinking its just a very small amount, oh probelly about <1%..

The Mad Hat Man · Oct 14, 2007

oooo - its gettin betterer as i go on - yup less than 1% - but an important 1%

Grippa · Oct 14, 2007

I dunno, looking at how much of the rad you got has rusted away Daft I'd reckon the bit yer need is nearer 10% of the total remaining!

slob · Oct 14, 2007

is that 10% of the landy rad or the poogut rad

Pikey · Oct 14, 2007

Int it gonna leak out the ends when yer put the hose on the piece of pug rad

slob · Oct 14, 2007

not if he dint fill it

The Mad Hat Man · Oct 14, 2007

nope not even that Grippa - just a nut - PLEASE no comment

havent decided how to mount the switch proper yet - maybe make up a tube to fit int o hose somewhere with the switch mounted into the side - but at the mo I mite just superglue the switch onto the series rad - just fur the Sodbury - an hope it dont fall orf.

MHM Lecky fan fitting in piccies

Well-Known Member

Attachments

Well-Known Member

Attachments

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Attachments

Well-Known Member

Well-Known Member

New Member

Well-Known Member

Well-Known Member

New Member

Well-Known Member

Dummy Ejection Facilitator..

Well-Known Member

Well-Known Member

Attachments

Similar threads