tom.brandford
Member
- Posts
- 68
On the ribs? You mean the front grille bit?Don’t mount the fan on the ribs. It will vibrate and burst about ten of them. Trust me, I know
Series 3 Overheat after motorway run
- Thread starter tom.brandford
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Bobsticle
De Villes Advocaat
- Posts
- 27,632
- Location
- Manchester
On the rad itself. I put a brand new rad on with a fan zip tied to it. It burst at least ten fins.
Had to temporarily fix them with superglue and baking soda. Having said that it’s still holding after about five years.
The cheap fan I got didn’t have a gasket to protect the fins and I ran out of bothered attempting a bracket, so I used the supplied zippy things.
Sorted!
tom.brandford
Member
- Posts
- 68
To be fair to it ran it down to London from Norfolk last night at 60-65 (my poor overdrive…) and with the heater on (in my genius I decided to remove the door top in wales whilst leaving the studs in situ) and it struggled to reach full operating temp!
Turboman
Mab An Gov
- Posts
- 60,151
- Location
- Lathrowda, Kernow
Fair bit cooler now.
But the temperature of the engine should still hold steady.
I reckon you have a thermostat problem,despite new thermostat.
Modern wax stats are pretty poor, there are lots that don't work out of the box.
tom.brandford
Member
- Posts
- 68
I do wonder about that - had to slow it down to get it to warm up fully. I’ve got a new one I’ll switch in my other one to see if that makes a difference - I the thermostat seems to not be overly ‘responsive’ to big changes in speed/temp etc. Possibly a combination of that plus the rad.
Turboman
Mab An Gov
- Posts
- 60,151
- Location
- Lathrowda, Kernow
Test the new thermostat before fitting it.
