- Posts
- 12,628
- Location
- Sud ouest France !
It had a new rad in 2007 and again in 2013.. they certainly don't last long!!
P38A You wouldn't believe it....now with necrophilia? What the...
- Thread starter Mark Piercy
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 58,170
- Location
- Preston Lancs.
I suggest you refit the shroud and a good viscous fan then. And check the filler cap it should have let the pressure in the system that caused that out long before the rad popped. It should blow off at 15 psi and totally release at 22 psi to avoid system damage. The rads do blow, but there is always a reason for it. Mine blew sat in traffic at lights waiting to join heavy slow traffic flow, after a lowish speed drive in traffic, viscous fan had failed. Sat stationary in traffic after a drive is when it is most needed.
- Posts
- 12,628
- Location
- Sud ouest France !
Thanks Tony, I had replaced the cap last year with febi bilstein, so it wasn't a cheap unknown part...I'll bear that in mind about the fan. The electric fan has been on there for over a year now with no other issues but I think you may be right
- Posts
- 19,297
- Location
- Buckinghamshire, UK. ('95 DT)
My face was 30cm in front of it just before it happened.... I have to go to the hospital... I'm changing my fùcking name..
The Singing Detective?
- Posts
- 58,170
- Location
- Preston Lancs.
Thanks Tony, I had replaced the cap last year with febi bilstein, so it wasn't a cheap unknown part...I'll bear that in mind about the fan. The electric fan has been on there for over a year now with no other issues but I think you may be right
BMW did a recall on the cap in the late nineties because it was causing all manner of problems. Bet your bottom dollar there are still a lot of duffers still out there. I have the cooling system static test rig that i can test cap release pressures with.
- Posts
- 12,628
- Location
- Sud ouest France !
- Posts
- 12,628
- Location
- Sud ouest France !
Good point, but your house is a long way to go from ours
...
- Posts
- 12,628
- Location
- Sud ouest France !
I hope the head gasket hadn't failed at that point...
The first rad lasted 8 yes and the second lasted just five and the last one did just five as well.... Aluminium or nissens?
The first rad lasted 8 yes and the second lasted just five and the last one did just five as well.... Aluminium or nissens?
- Posts
- 19,297
- Location
- Buckinghamshire, UK. ('95 DT)
Had Nissens on mine for years. Ideally I stay away from plastic where possible. Someone on here had one made up bespoke for not a lot of money. Cannot remember who now or where they got it from. Maybe @brianp38dse can remember? Mind you, seeing as you're in France you'd need someone there most likely.
- Posts
- 12,628
- Location
- Sud ouest France !
Cheers @Grrrrrr , is the nissens an all Ali' unit or plastic capped?
- Posts
- 58,170
- Location
- Preston Lancs.
Plastic but good quality unit.
- Posts
- 12,628
- Location
- Sud ouest France !
We've got a wok as well....
- Posts
- 12,628
- Location
- Sud ouest France !
I've used nissens on other vehicles before, they are pretty good and Ive never had any comebacks using them.
I'm just worried about the plastic now....
- Posts
- 12,628
- Location
- Sud ouest France !
- Posts
- 12,628
- Location
- Sud ouest France !
What about... Using the wok?
Should have immersed it in cold water and stayed there for hours, burned skin off back of my hand with blowtorch once, held it in water for over 5 hours then cold water soaked towel all night, took all the heat away and no pain, kept it covered and it healed in couple of weeks and no scar
Similar threads
