Hi guys, in trying to figure out what year the bulkhead is on my series Landy. I've looked in all my books and on tinternet but I can't find reference to one that has a rain gulley all the way across it (where the bonnet meets the bulkhead when it's closed - please see pic attached). Any ideas? Cheers. Olly
Yet more identification.....
- Thread starter Olly_Webb
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
LordOWar
Well-Known Member
- Posts
- 460
- Location
- North West
It just looks like a series 3 bulkhead, my original looked like that (1976) and the galvo one I bought looks the same.
Bobsticle
De Villes Advocaat
- Posts
- 27,632
- Location
- Manchester
Looks like my 3 bulkhead. But then again mine could be half Ferguson and more than likely is.
blue beasty
Leaks an prone to bits dropping off
- Posts
- 63,117
- Location
- Gloucestercotshirewolds
Bobsticle
De Villes Advocaat
- Posts
- 27,632
- Location
- Manchester
Think I've got wun of thems.Prolly out the rocker cover breather cap thingy wotsit
Land Raver
Well-Known Member
- Posts
- 2,015
- Location
- In the dog house
I think it was pre 1973 models which had like 'eye brow' drain channels instead of the one big long one.
Not the most helpful advice, but thanks anyway.
Seeing as none of the books in the picture had a bulkhead like mine I thought it best to all the question and as per usual landyzone users came up trumps!
Attachments
Sorry that didn't come across correctly. My reason for suggesting this is that the parts catalogue has a detailed diagram of the bonnet. It wasn't intended to be dismissive. You can't wholly always rely on the forum if you are maintaining a landy. My suggestion was based on having the basic information to help!
tomhop
Active Member
- Posts
- 320
- Location
- Scotland Angus
is the dark green haynes manual in the back of that photo any good? i have the green bible and the blue service and repair haynes manual and sometimes still end up scratching my head in bewilderment!
Bobsticle
De Villes Advocaat
- Posts
- 27,632
- Location
- Manchester
I think the only way mine left the factory was via the skip.
