S3hooke
Active Member
- Posts
- 125
- Location
- Exeter, Devon- come say hi!
New cambelt and all welding professionally done- old rust cut out and new sills. Pillars and boot and front floors welded in. A lot of history including first mot in 95. Service history is great although not fully complete
New discs and pads all round and front bearings. Engine has done 173k and is a 200 series factory fitted job.
Exterior could do with a little tarting where blistering or laquer peel or crazing has happened. Inside door cards are nice but again a little tidying needed
No front bumper, Headlining sag but on the bright side has three spoke alloys with 7.50 new tyres fitted so looks better than pics
Offer around £1200 owing to the mechanical soundness and long Mot
New discs and pads all round and front bearings. Engine has done 173k and is a 200 series factory fitted job.
Exterior could do with a little tarting where blistering or laquer peel or crazing has happened. Inside door cards are nice but again a little tidying needed
No front bumper, Headlining sag but on the bright side has three spoke alloys with 7.50 new tyres fitted so looks better than pics
Offer around £1200 owing to the mechanical soundness and long Mot
Attachments
Last edited:
