Work light wiring advice

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
J

jaykingfunk

Member
Posts
58
Location
Yorkshire
Evening all,

I have a work light and have no idea what sort of cable I need?!

I have removed the twist switch as I want to operate from the inside with a LED toggle switch.

Anyone wired one up before? Any advice would be much appreciated!

Cheers, J.
 
The wattage of the bulb/lamp will govern the amount of current drawn at 12v and will also govern the cable size used and also fuse size................

So what wattage is the bulb/lamp??

1 x 55w / 12v = 4.583 amps
 
chivenor said:
Buy a lenght of towing cable, it will be right for your lamps and you get a choice of colours!!
Click to expand...

Depending on the wattage of the bulb(s) being used it might not be.
Most 7-core cable is only designed for a 21W bulb max, so if the work light is fitted with a 55W bulb you are drawing over twice the design current. Over loading a cable is not only a danger if the cable overheats and causes a short but also it can cause voltage drop so you don't get the full performance out of the bulb anyway.

Determine the wattage of the bulb and then choose the correctly rated cable. the likes of VWP have a handy on-line guide if you are stuck.
 
the bulb is 55w so after some basic maths I reckon I'll need 5 amp cable to be on the safe side, 2 fuse holders and fuses and possibly a relay?!
 
You must log in or register to reply here.

Similar threads

W
1997 Defender hazard switch bulb replacement.
Replies
12
Views
342
Wolf Pack
W
C
Defender TDCi Puma 90 - Diff Lock Light
Replies
12
Views
535
crashmat
C
D
Custom Air conditioning wiring Defender TD5
Replies
4
Views
395
DavidMIng
D
C
Warning Light for WIPAC indicator module not lighting up.
Replies
1
Views
403
miktdish
miktdish
S
1988 90 replacing lights with LEDs and have lots of questions
Replies
5
Views
821
sleepybear
S
Back
Top