Wiring through bulkhead

Morning all,
Am wiring up some spots I got from Peterborough show, have taken all the feeds I need for the relay and positioned it next to the other relays in the centre fuse panel thingy (90 200tdi by the way). Anyways, trying to make this as neat a job as possible so want to pass the wires through the grommet just above the fuses, only it seems impossible to get to the otherside as there is a box rivetted over it in the enginebay!?!? Just wanted to get some feedback to whether anyone has managed to wire through there or if its a total lost cause.

Ye could use a stiffer piece of wire with the spots wire taped to it. The rivet things are like the ones on the wheel arch spats, they have a plastic pin going through the middle. If ye need a little more room then take the fuse holder off

Cheers Buster, could swear they were metal rivets but it'll be damn helpful if they're the plastic ones like you say!! I'll persevere with it in a bit as it'll be a whole lot nicer to have the wires going through there than anywhere else!

tankduck said:

Morning all,
Am wiring up some spots I got from Peterborough show, .

Click to expand...

No, you can't use through the bulkhead wiring with them Peterborough show spots

enlighten us. why not

Good one spud

Forgot to mention, after lots of ****ing around I managed to get it all wired up throught the bulkhead, got the relay mounted with the others behind the fusepanel and just waiting for more wire to get to the battery and its done

tankduck said:

Forgot to mention, after lots of ****ing around I managed to get it all wired up throught the bulkhead, got the relay mounted with the others behind the fusepanel and just waiting for more wire to get to the battery and its done

Click to expand...

Excellent.

show us some pics.