- Posts
- 83,300
- Location
- Embasinga stocæ
The only way to do wot yu want to do, proper like, is to get proper bulkhead connectors that are designed to take the current - available from auto elecricians.
Wiring Breakthrough??
- Thread starter BIOSBILL
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
yella
New Member
- Posts
- 15,991
and use proper wire, not feckin 7 core ffs
iannotts
New Member
- Posts
- 4,401
- Location
- East midlands,
Where can you get proper wire from?
(Genuine question) and what is the difference between it and 7core (2.5mm)?
(Genuine question) and what is the difference between it and 7core (2.5mm)?
- Posts
- 83,300
- Location
- Embasinga stocæ
the correct current rating, the correct colour codes, the correct insulation, the correct heat transfer rating...............
yu want me to continue?
try vehicle wiring products - they have bulkead connectors too.
oh - and if yu dont know wot yu is dooing - ask stig.
yu want me to continue?
try vehicle wiring products - they have bulkead connectors too.
oh - and if yu dont know wot yu is dooing - ask stig.
slob
Well-Known Member
- Posts
- 22,488
- Location
- Harrogate or London
yer can't get the proper wire colours in yer 7core, yer have to strip the outer off yer 7 core unless yer starting and finishing in the same place, which yer int. and its just plain daft when someone else has to fault find on it. and its also stupid cos i sed so
yella
New Member
- Posts
- 15,991
why has he found a book at the boot sale since he done mine????
slob
Well-Known Member
- Posts
- 22,488
- Location
- Harrogate or London
once bought a car with the engine wired up with T&E.. fooking reet joke that wur but i got it cheap
- Posts
- 83,300
- Location
- Embasinga stocæ
where are yu Ian?
cummon Yella - I is waiting
cummon Yella - I is waiting
iannotts
New Member
- Posts
- 4,401
- Location
- East midlands,
Yeaaaaaaaaaa, didnt think there was anything on a series that is that sensitive. As for current rating and heat that why was thinking of 2.5mm. As I put in an ealier post highest draw I can think off is 9.1 amps.
[/quote] try vehicle wiring products - they have bulkead connectors too.
oh - and if yu dont know wot yu is dooing - ask stig.[/quote]
- Posts
- 83,300
- Location
- Embasinga stocæ
it aint sensitive - but that dont mean yu gotta use 2" copper bar throughout. Yu gonna use thinwall, standard wall, Euro Auto colour codes? or just make a fookin mess?
ffs - gimme strength!
ffs - gimme strength!
slob
Well-Known Member
- Posts
- 22,488
- Location
- Harrogate or London
calm yersin daft. yer know it will only give yer palpitations
- Posts
- 83,300
- Location
- Embasinga stocæ
yu know wot i mean slob - yu get just as irate about peeps makin a dogs dinner over summat they know fook all about.
slob
Well-Known Member
- Posts
- 22,488
- Location
- Harrogate or London
i dint get iraq... ah just well yer know , take the piff . if yer going do rewire the fooker do it right other wise yiule be having a new lectrickle fault every week and they will all be caused by yer bodge job. and dint go using them crimp on **** neither. gert a soldiering iron some solder and heat shrink then to make it all pretty some loooming tape
iannotts
New Member
- Posts
- 4,401
- Location
- East midlands,
I'll stop pushing the idea now then shall I and let mad calm himself down
- Posts
- 83,300
- Location
- Embasinga stocæ
or just pay me huge sums of money to do it fur ya.
slob
Well-Known Member
- Posts
- 22,488
- Location
- Harrogate or London
aye yer better cos wur daft makes bespoke wiring looms fer serieesesss
iannotts
New Member
- Posts
- 4,401
- Location
- East midlands,
I'll stop pushing the idea now then shall I and let mad calm himself down
But.......... I am quite sure it not be a mess. And as fe know fook all about
BIOSBILL
New Member
- Posts
- 147
- Location
- Norfolk UK
****, Not a gd idea then
Has just been completely rewired with the trailer stuff for all the low current stuff (sensors+sidelights etc) then heavier stuff for others.
No colour coding as you say, so a pig to find anything (I always have a meter handy)
Do I have to rip it all out and do it again?
Has just been completely rewired with the trailer stuff for all the low current stuff (sensors+sidelights etc) then heavier stuff for others.
No colour coding as you say, so a pig to find anything (I always have a meter handy
) Do I have to rip it all out and do it again?
yella
New Member
- Posts
- 15,991
aye rip it out and start a fresh, rewire it using correct colour coding or if you have any collateral in yer house, re mortgage and get daft ter mek yer a bespoke up
