Wiper spindle part?

LeadFarmer

Well-Known Member

Posts

6,742

Location

Yorkshure

• Mar 29, 2019

• #1

Anyone know if the splined end bit of the windscreen wiper box assembly is available separately? Its the bit that the wiper arm attaches directly to, with the little grub screw to hold it on.

The two circular top hat shaped bits in the middle of this picture...

 

Last edited: Mar 29, 2019

bluedog333

Well-Known Member

Posts

5,442

Location

Henley on Thames, Oxfordshire

• Mar 29, 2019

• #2

Yep, they’re only a couple of quid each, two types to choose from so get the ones that match your spindles. Don’t have the part numbers to hand.

 

bluedog333

Well-Known Member

Posts

5,442

Location

Henley on Thames, Oxfordshire

• Mar 29, 2019

• #3

Search for ‘Defender wiper spindle adapter’.

 

marjon

Well-Known Member

Full Member

Posts

16,726

Location

Bulgaria

• Mar 29, 2019

• #4

STC 987

Shows for me not sure if any diff ones.

J

 

LeadFarmer

Well-Known Member

Posts

6,742

Location

Yorkshure

• Mar 29, 2019

• #5

bluedog333 said:

Search for ‘Defender wiper spindle adapter’.

Click to expand...

Brill, I ws hoping they were available separately.

Just bought a pair from eBay for £4.65

Part STC987

Thanks

 

LeadFarmer

Well-Known Member

Posts

6,742

Location

Yorkshure

• Mar 29, 2019

• #6

My LR Def 110 300tdi failed its MOT today (as did my motorbike) as the passenger wiper doesn't do a full sweep, the splines inside the wiper arm have worn, causing the arm to slip, as they do. Just ordered a new arm and thought i may as well replace the adapter as well.

Thanks everyone.

 

L

Landy_Ben

Active Member

Posts

209

Location

UK

• Sep 30, 2019

• #7

LeadFarmer said:

My LR Def 110 300tdi failed its MOT today (as did my motorbike) as the passenger wiper doesn't do a full sweep, the splines inside the wiper arm have worn, causing the arm to slip, as they do. Just ordered a new arm and thought i may as well replace the adapter as well.

Thanks everyone.

Click to expand...

how do you get these adapters off? Tried a few Allen keys but they seem too small to not round it off. I have one adaptor that will not sit straight on the arm. thanks

 

dag019

Well-Known Member

Posts

6,099

Location

Warwick

• Oct 1, 2019

• #8

Landy_Ben said:

how do you get these adapters off? Tried a few Allen keys but they seem too small to not round it off. I have one adaptor that will not sit straight on the arm. thanks

Click to expand...

When I had to do mine the answer was carefully with the dremmel!

 

L

Landy_Ben

Active Member

Posts

209

Location

UK

• Oct 1, 2019

• #9

I guess I will be drilling out the Allen bolt.

 

LeadFarmer

Well-Known Member

Posts

6,742

Location

Yorkshure

• Oct 4, 2019

• #10

Landy_Ben said:

how do you get these adapters off? Tried a few Allen keys but they seem too small to not round it off. I have one adaptor that will not sit straight on the arm. thanks

Click to expand...

Not sure if they are an imperial size?

 

Flossie

Well-Known Member

Posts

11,001

Location

Shropshire

• Oct 4, 2019

• #11

It was a while ago when I did mine but I replaced the hex plugs with metric stainless steel bolts. I might have tapped them out to metric or they were already so, can't remember.