gemsdad
NOT BOTHERED.
- Posts
- 67,815
- Location
- halfway between here and there.
does anyone know if disco 1 wiper arms will fit on a disco2.thanks.
wiper arms
- Thread starter gemsdad
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Gordy88
Active Member
- Posts
- 221
- Location
- Lisburn, Co Antrim
They're different, but fit ok,
Would be interesting to know if the new style floppy blades can be fitted though
Would be interesting to know if the new style floppy blades can be fitted though
gemsdad
NOT BOTHERED.
- Posts
- 67,815
- Location
- halfway between here and there.
ok,thanks.i want to change my d2 ones for d1's because the blades are easier to get hold of and are cheaper etc.
gemsdad
NOT BOTHERED.
- Posts
- 67,815
- Location
- halfway between here and there.
yes you can buy the newer type flat blades for the d2,but they cost £20+ for two,that is why i want to fit the earlier type with the hook end so the standard type flat blade can be fitted.
gemsdad
NOT BOTHERED.
- Posts
- 67,815
- Location
- halfway between here and there.
roger352
Active Member
- Posts
- 268
The rear D2 fits as well, the one I got has the washer jet in the wiper arm. Straight swap but you have to cut away a bit of the spare wheel holder. You can either leave the D1 washer or as I did connected both up, mind you it was simple because I have the roof lining off to replace the lining.
gemsdad
NOT BOTHERED.
- Posts
- 67,815
- Location
- halfway between here and there.
roger,i own a D2,not D1,so my rear wiper is ok,it was just the fronts i needed to know about.
sierrafery
Well-Known Member
- Posts
- 17,964
- Location
- Arad/Romania
i've just fitted D1's on my D2 cos i was fed up with the D2 ones, especially to prepare myself for winter when the D2 arms and blades(even the dedicated winter blades) are a nightmare at below -5*C...on the D1's you can fit any kind of aero blades which are more reliable
gemsdad
NOT BOTHERED.
- Posts
- 67,815
- Location
- halfway between here and there.
exactly my point,that is why i want to fit them as well.SF pm inbound.
Orch
Active Member
- Posts
- 626
- Location
- Salisbury area
I fitted D1 wipers arms for the same reasons. I find the passenger side spring isn't strong enough and the blade misses parts of the screen. The drivers side is much much better tho.
gemsdad
NOT BOTHERED.
- Posts
- 67,815
- Location
- halfway between here and there.
why l/rover changed the wiper arm design is ridiculous,the hook type is great,the D2 type is crap.
Orch
Active Member
- Posts
- 626
- Location
- Salisbury area
Yep!!why l/rover changed the wiper arm design is ridiculous,the hook type is great,the D2 type is crap.
Gordy88
Active Member
- Posts
- 221
- Location
- Lisburn, Co Antrim
sure is, D1 a far better arangement
Similar threads
Disco 3 (LR3)
Discovery 3 rear wiper
