lincsailerman
New Member
- Posts
- 6
had to change the drivers side front door o my 98 p38, used the regulator etc from my old door that was working fine before, now when i lift the glass it goes up on the skew, front edge down, any ideas please
window not working
- Thread starter lincsailerman
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 58,170
- Location
- Preston Lancs.
Yeah you have done something wrong.
kevwill
Active Member
- Posts
- 930
- Location
- Sunny Hastings
Good idea to introduce yourself in the appropriate section (landyzone manners):welcome:
Take the door trim panel off and watch what it does. Sounds like you've not fitted it in the new door correctly.
Take the door trim panel off and watch what it does. Sounds like you've not fitted it in the new door correctly.
Rick-the-Pick
Active Member
- Posts
- 782
- Location
- Hove, Sussex.
Yep, I go with Wammers.
Somethings broken.
Somethings broken.
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
:welcome:
rewmer
Well-Known Member
- Posts
- 2,082
- Location
- Clacton, Essex, UK
I think the rubber guide has come off
Don't think that would give the problems you have, usually causes the window to rattle when partly open / opened. Sounds like something out of place on the regulator. I would pull the door card & check the other side to compare whats different
Datatek
Well-Known Member
- Posts
- 44,887
- Location
- Near Poitiers SW France
Last one I saw that did that the regulator had broken.
