brandonfreelander
New Member
- Posts
- 8
- Location
- cowfield gould
Looking for a winch for my 1999 2.0 tdi (not td4) I've seen the mainfield winch mount but it says it will fit td4 will it fit mine as well? If not what others are out there?
Freelander 1 winch advice
- Thread starter brandonfreelander
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
brandonfreelander
New Member
- Posts
- 8
- Location
- cowfield gould
Okay thanks
Winu
Active Member
- Posts
- 795
- Location
- Poland,Warsaw
Nope... chassis rails where winch is bolted are different (longer). Mount for td4 DON'T fit 98-00 cars.
brandonfreelander
New Member
- Posts
- 8
- Location
- cowfield gould
Okay so does anyone know of any winch mount that will fit?
Winu
Active Member
- Posts
- 795
- Location
- Poland,Warsaw
Just need to mod Td4 one...
brandonfreelander
New Member
- Posts
- 8
- Location
- cowfield gould
Can a winch be mounted on bull bars/ a bar/ ram bar whatever u want to call them
htr
Well-Known Member
- Posts
- 1,557
- Location
- Central Otago, Southern New Zealand
Yes, but you'll need the strengthened nudge bars or adapt your existing one. They are a six point mounting arrangement and they have different, stronger mounting points to the bumper mounts and the lower ends too. The winch is able to be attached / detached readily via a mounting plate which it sits on. There are images of these in the 2015 Rimmer Bro [FL 1997-2000]parts & acc list, see p17 & 25.
Last edited:
Have you read this thread?
https://www.landyzone.co.uk/land-rover/freelander-1-winch-bracket.229747/#post-2637605
https://www.landyzone.co.uk/land-rover/freelander-1-winch-bracket.229747/#post-2637605
htr
Well-Known Member
- Posts
- 1,557
- Location
- Central Otago, Southern New Zealand
