HP FUEL PUMP TD4

Arctic2 said:

Did this job Wednesday on a friends FL1 battery earth off, take the weight of the engine with a trolley jack piece under the sump, manifold was already removed from a previous job, starter motor removed, top mount removed, jack up the engine a little to gain access to the blanking plug 17mm, remove the 21mm sprocket nut, insert first part of the special tool screw in fully then back it off at least three threads, insert second part and turn anticlockwise just to find the thread then turn clockwise to screw in, once you have it started screw in a little then tighten up the first part the rest should be ok.

Click to expand...