will disconnecting my battery kill my disco??

discovery300td · Jan 16, 2011

my battery's gone flat and a friend told me if i disconnect it to charge it then it would un-code my immobiliser and it wouldn't run. But i was told by another friend that i've got nothing to worry about. Can anyone help pls?

cornish rattler · Jan 16, 2011

no i have had my battery disconected a few times all it does is the stereo looses its code so make sure you have it at hand when you re connect the battery should be in the hand book if you have it.

graham
_________________
98 d1 300tdi auto.

discovery300td · Jan 16, 2011

thanks. I was hoping that would be the case. Didn't want to risk it without being sure though

jamesmartin · Jan 16, 2011

your supposed to turn ignition on then off and remove earth strap from battery within 15 secs ,so you dont upset alarm

discool · Jan 16, 2011

jamesmartin said:
your supposed to turn ignition on then off and remove earth strap from battery within 15 secs ,so you dont upset alarm

That's only to stop the battery backed up sounder sounding, some hope my sounders battery gave up years ago.

discool · Jan 16, 2011

discovery300td said:
my battery's gone flat and a friend told me if i disconnect it to charge it then it would un-code my immobiliser and it wouldn't run. But i was told by another friend that i've got nothing to worry about. Can anyone help pls?

I have never disconnected any battery before charging it, there's no need.

thebiglad · Jan 16, 2011

discovery300td said:
my battery's gone flat and a friend told me if i disconnect it to charge it then it would un-code my immobiliser and it wouldn't run. But i was told by another friend that i've got nothing to worry about. Can anyone help pls?

You should always disconnect the battery neg lead before charging it. The only code you will need is for the radio.

The method that I have found works reliably is to:

1. Turn the ignition on, then off then immediately remove the neg lead, leaving the keys in place.

2. Now charge your battery for as long as you can manage - the longer the better, then replace the neg lead.

3. Now fire up the engine, stop the engine and check the functioning of the remote central locking.

elmer_d · Jan 16, 2011

When I have taken my battery off when restarting the engine appears to run rough for a minute or so, just rev it a little, 2500 RPM, think it may be the engine management re learning or something like that

nothing to worry about, just be aware it may do same, scared me first time

jase750 · Jan 16, 2011

I've heard of a tip about wiring a PP3 9v battery up so when you disconnect the main battery when you reconnect it it keeps the radio code . .
how true it is I don't know

elmer_d · Jan 16, 2011

not very, 9v PP3 is not going to run disco for the hours that a full recharge will take

connecting a 12 v car battery for the duration will do it, but more fuss than needed, as long as you know the radio code JFDI

The Mad Hat Man · Jan 16, 2011

the pp3 is just to keep the system alive whilst changing the battery, not whilst charging it. It does work on some motors, but I wouldnt like to try it on a Rangie or a Merc

.

Richard Martin · Jan 16, 2011

Don't forget you'll need to reset the clock as well as the radio after you have reconnected the battery

will disconnecting my battery kill my disco??

discovery300td

New Member

cornish rattler

Well-Known Member

discovery300td

New Member

jamesmartin

Well-Known Member

discool

Well-Known Member

discool

Well-Known Member

thebiglad

Well-Known Member

elmer_d

Active Member

jase750

Active Member

elmer_d

Active Member

The Mad Hat Man

Well-Known Member

Richard Martin

Well-Known Member

Similar threads