Will a recon gearbox add value to the disco?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
A

Ares

New Member
Posts
111
The disco needs a new gearbox and a new/recon box will cost around £500.

I'm looking to sell it now as I need a car with good economy so what I wan't to know is will it be worth getting a new/recon box on her then selling? i.e. will I make a better profit doing this or should I just stick a 2nd hand box in from a breakers?

It's in good condition other than the box.
 
200tdi. I have a box without the bell housing on to get shot of. Was a great box but didn't need as I just wanted the engine.

P.s yes spam 😃
 
Ah thanks munkey but mine is a 300tdi.. so different gearbox isn't it? :(

Well it looks like I'll be searching for a decent used box then!
 
Ares said:
The disco needs a new gearbox and a new/recon box will cost around £500.

I'm looking to sell it now as I need a car with good economy so what I wan't to know is will it be worth getting a new/recon box on her then selling? i.e. will I make a better profit doing this or should I just stick a 2nd hand box in from a breakers?

It's in good condition other than the box.
Click to expand...

Frankly if it's that bad, you could do worse than having a go at rebuilding, or at least fixing what's broken inside it, yourself! It's not like you can feck it up is it? ;)
 
chunkymunky said:
To be honest you can pick up gearboxes cheap, why fk about?
Click to expand...

'cos you can ..

'cos you can't make it worse and it might only cost your time ..

'cos you have to take the fecked one off anyway and if you can't afford another, however cheap you say they are, then it makes sense.

I like to .. ;)
 
No sweat, and to be honest I'd probably want it fixed quickly so would probably buy a recon/second hand unit .. but I'd definitely have the old nackered unit on a bench somewhere, have it opened and see what's broken at least. Try to refurb it and either keep as a spare or sell on .. no time-limit, no hassle, good fun! ;)
 
Well I got a second hand box on ebay and it seems OK. Not much play in the main shaft, unlike the original, no grinding sound when you turn the shaft as there is with the original.

The old box is out, dismantled, and the new box has been assembled with the gear lever unit and transfer box from the old one.
Tomorrow is putting it all back in...

Question.. any simple way to get the box from the ground and into the car? Last time it took two of us to and 3 jacks to hold it up enough to put the cross member back in. A gearbox jack seems ideal but we don't have one.

The transfer box didn't have much oil in and the old gearbox oil was not nice looking.. full of metal filings, most of it stuck to the magnetic plug.

Should I flush the new box, and if so, with what?
 
uncle albert said:
I normaly stick it back in with a trolly jack and a lot of care(of myself there kin heavy)
Click to expand...

Yeah they are heavy..and awkward!

Unfortunately the jacks we have don't go high enough so it was a case of jack it with one then add another jack with wood/bricks under it... lift again and repeat etc. A right pain!
 
Ares said:
Well I got a second hand box on ebay and it seems OK. Not much play in the main shaft, unlike the original, no grinding sound when you turn the shaft as there is with the original.

The old box is out, dismantled, and the new box has been assembled with the gear lever unit and transfer box from the old one.
Tomorrow is putting it all back in...

Question.. any simple way to get the box from the ground and into the car? Last time it took two of us to and 3 jacks to hold it up enough to put the cross member back in. A gearbox jack seems ideal but we don't have one.

The transfer box didn't have much oil in and the old gearbox oil was not nice looking.. full of metal filings, most of it stuck to the magnetic plug.

Should I flush the new box, and if so, with what?
Click to expand...
Hi, when i changeed my box i put a scaffold tube throuh windows . Hung chainhoist on it , winched gearbox up
 
You must log in or register to reply here.

Similar threads

kevstar
D1 200tdi lt77 & transfer box n bits
2
Replies
22
Views
2K
kevstar
kevstar
M
1984 90 whats it worth?
Replies
7
Views
705
Forestrax4x4
F
A
Freelander 1 Now we are 2.
Replies
19
Views
1K
Alex1000
A
dag019
A question of gearboxes
Replies
16
Views
973
Skolmate
Skolmate
ChrisBduck
3.6L Land rover 90
Replies
2
Views
792
ChrisBduck
ChrisBduck
Back
Top